Machine Design BasicsLaajuus (5 cr)
Code: 5K00DM63
Credits
5 op
Objectives
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Enrolment period
02.12.2023 - 18.01.2024
Timing
01.01.2024 - 31.07.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
24AI112
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.07.2023 - 10.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
23I112A
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.07.2023 - 10.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
23I112B
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.07.2023 - 10.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
23I112C
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.12.2022 - 11.01.2023
Timing
01.01.2023 - 31.07.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
23AI112
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.07.2022 - 06.09.2022
Timing
01.08.2022 - 31.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
22I112A
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.07.2022 - 06.09.2022
Timing
01.08.2022 - 31.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
22I112B
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.07.2022 - 06.09.2022
Timing
01.08.2022 - 31.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
22I112C
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5
Enrolment period
02.12.2021 - 30.01.2022
Timing
10.01.2022 - 02.05.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Pauliina Paukkala
Groups
-
22AI112P
Objectives (course unit)
The student knows the basics of typical small machine structures and the methods of joining these parts, materials, machine elements, components and their selection criteria. The student is able to work in a project and group work environment. The student understands the basics of machine and electrical safety. Students are able to report and present their work. The student is able to choose the right tools and methods assembling and dismantling equipment and joints.
Content (course unit)
Structures of typical small machines. Typical part joining methods, materials, machine elements for machine parts. Selection criteria for components. The basics of machine and electrical safety.
Assessment criteria, satisfactory (1-2) (course unit)
The student will be able to identify some structures, materials and components of small machines. The student understands the basics of machine safety.
Assessment criteria, good (3-4) (course unit)
The student recognizes a large part of the structures, materials and components of small machines and has also independently acquired some information about them. The student understands well the basics of machine safety.
Assessment criteria, excellent (5) (course unit)
Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth. The student understands well the basics of machine safety and knows how to use this information in his / her own initiative.
Assessment scale
0-5