Skip to main content

MechanicsLaajuus (3 cr)

Code: 5N00EI67

Credits

3 op

Objectives

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Enrolment period

03.08.2024 - 12.09.2024

Timing

02.09.2024 - 13.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 24BIOTA

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.12.2023 - 22.01.2024

Timing

15.01.2024 - 26.05.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Noora Erkkilä
Person in charge

Noora Erkkilä

Groups
  • 24AI231

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

22.11.2023 - 14.01.2024

Timing

01.01.2024 - 01.05.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 24AI112

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

22.08.2023 - 22.10.2023

Timing

23.10.2023 - 15.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Jari Puranen
Person in charge

Jari Puranen

Groups
  • 23AUTOA

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

22.08.2023 - 22.10.2023

Timing

23.10.2023 - 15.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Jari Puranen
Person in charge

Jari Puranen

Groups
  • 23AUTOB

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

07.06.2023 - 08.09.2023

Timing

28.08.2023 - 20.10.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
Person in charge

Reijo Manninen

Groups
  • 23BIOTA
  • 23BIOTB

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2023 - 10.09.2023

Timing

28.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 23I231B

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

01.07.2023 - 17.09.2023

Timing

01.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 23RTB

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

01.07.2023 - 17.09.2023

Timing

01.08.2023 - 31.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Noora Erkkilä
Person in charge

Noora Erkkilä

Groups
  • 23RTA

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2023 - 11.08.2023

Timing

01.08.2023 - 31.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Person in charge

Markus Aho

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

01.07.2023 - 17.09.2023

Timing

01.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 23RTC

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

01.07.2023 - 17.09.2023

Timing

01.08.2023 - 31.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Noora Erkkilä
Person in charge

Noora Erkkilä

Groups
  • 23RTD

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2023 - 03.09.2023

Timing

01.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 23I112C
  • 23I112B
  • 23I112A

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2023 - 10.09.2023

Timing

01.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 23I112C
  • 23I112B
  • 23I112A

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

21.11.2022 - 05.03.2023

Timing

03.03.2023 - 19.05.2023

Credits

3 op

Virtual portion

3 op

Mode of delivery

Online learning

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 120

Teachers
  • Sami Suhonen
Person in charge

Sami Suhonen

Groups
  • 23CAMPUSONLINE
    CAMPUSONLINE
  • VAPAA

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.12.2022 - 21.01.2023

Timing

16.01.2023 - 28.05.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Sami Suhonen
Person in charge

Sami Suhonen

Groups
  • 23AI112
  • 23AI371
  • 23AI253

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.12.2022 - 15.01.2023

Timing

01.01.2023 - 01.05.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 23I231A

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

22.08.2022 - 23.10.2022

Timing

24.10.2022 - 10.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Jari Puranen
Person in charge

Jari Puranen

Groups
  • 22AUTOA

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

22.08.2022 - 23.10.2022

Timing

24.10.2022 - 10.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Jari Puranen
Person in charge

Jari Puranen

Groups
  • 22AUTOB

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 15.09.2022

Timing

12.09.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Fysiikka Virtuaalihenkilö
Person in charge

Sampo Saari

Groups
  • 22RTC

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 15.09.2022

Timing

01.09.2022 - 19.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 22RTA

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 31.08.2022

Timing

29.08.2022 - 19.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 22I231B

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

01.08.2022 - 19.09.2022

Timing

29.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Roope Siikanen
Person in charge

Roope Siikanen

Groups
  • 22RTD

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 09.09.2022

Timing

29.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Roope Siikanen
Person in charge

Markus Aho

Groups
  • 22I112B
  • 22I112C

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

23.07.2022 - 11.09.2022

Timing

22.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Lauri Judin
Person in charge

Lauri Judin

Groups
  • 22BIOTA
  • 22BIOTB

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Enrolment period

02.07.2022 - 15.09.2022

Timing

01.08.2022 - 19.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Construction Engineering
Teachers
  • Sampo Saari
Person in charge

Sampo Saari

Groups
  • 22RTB
  • 22RTC

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 21.08.2022

Timing

01.08.2022 - 23.10.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Open University of Applied Sciences
Teachers
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 22AVOTT
    Teollisuusteknologiayksikön polkuopiskelijaryhmä

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 01.09.2022

Timing

01.08.2022 - 19.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 22I112A

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 31.08.2022

Timing

01.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Fysiikka Virtuaalihenkilö
Person in charge

Lauri Judin

Groups
  • 22I112C

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.07.2022 - 04.09.2022

Timing

01.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 22AI231

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

01.08.2022 - 05.09.2022

Timing

01.08.2022 - 23.10.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Building Services Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Lauri Judin
Person in charge

Lauri Judin

Groups
  • 22I254
  • 22I253

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.12.2021 - 16.01.2022

Timing

01.01.2022 - 15.05.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 22I231A

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5

Enrolment period

02.12.2021 - 21.01.2022

Timing

01.01.2022 - 11.03.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Sampo Saari
Person in charge

Sampo Saari

Groups
  • 22AI112P

Objectives (course unit)

The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations

Content (course unit)

SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.

Assessment criteria, satisfactory (1-2) (course unit)

Student is able to use quantities and units and solve simple problems in mechanics.

Assessment criteria, good (3-4) (course unit)

Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.

Assessment criteria, excellent (5) (course unit)

Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.

Assessment criteria, pass/fail (course unit)

Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.

Assessment scale

0-5