Practical Training 2Laajuus (12 cr)
Code: 5K00DK65
Credits
12 op
Objectives
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2)
.
Assessment criteria, good (3-4)
.
Assessment criteria, excellent (5)
.
Assessment criteria, pass/fail
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Enrolment period
02.07.2025 - 31.07.2025
Timing
01.08.2025 - 31.12.2025
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mikko Ukonaho
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
23I112C
-
23I112B
-
23I112A
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2024 - 31.07.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mikko Ukonaho
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
22I112A
-
22I112B
-
22I112C
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2024 - 11.08.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
23AI112
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 31.07.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mikko Ukonaho
- Mika Nikander
Groups
-
21I112A
-
21I112B
-
21I112C
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
21I111
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
21I160
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
21I180
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
21I190
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
21I228K
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
22AI112P
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
20I111
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
20I160
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
20I180
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
20I190
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Mika Nikander
Groups
-
20I228K
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Markus Aho
Groups
-
21AI112
Objectives (course unit)
A student can utilize basic engineering knowlwdge and skills in practice when working as a practicant in industry.
Content (course unit)
8 weeks industrial training
Working as a student in a professional field as part of a work community. Getting a deeper insight into the usual work tasks, techniques, occupational safety and different practices in your field at work.Training diary and reporting.
Prerequisites (course unit)
Practising plan, practising diary, practising report
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
The second part of the internship must be a sectoral work placement, which the student performs in an industrial enterprise with 12 credits. Approved work (8 weeks = 8 * 40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5