Laboratory Works of PhysicsLaajuus (3 cr)
Code: 5N00EI72
Credits
3 op
Objectives
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites
Basics of Measuring and Reporting
Assessment criteria, satisfactory (1-2)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail
Fail: Not all required assignments are fulfilled or student has been absent.
Further information
Alternative ways for project learning implementations
Enrolment period
02.07.2024 - 02.09.2024
Timing
02.09.2024 - 01.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Jari Puranen
- Tuomo Nieminen
Person in charge
Jari Puranen
Groups
-
23I254
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2024 - 08.09.2024
Timing
02.09.2024 - 15.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Anne Leppänen
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
23I253
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
10.06.2024 - 01.09.2024
Timing
26.08.2024 - 20.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
23I231A
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
10.06.2024 - 10.09.2024
Timing
26.08.2024 - 17.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
23I231B
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
07.06.2024 - 08.09.2024
Timing
01.08.2024 - 17.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
23AI112
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2023 - 19.01.2024
Timing
08.01.2024 - 26.05.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
22AI231
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
12.12.2023 - 10.01.2024
Timing
08.01.2024 - 12.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
- Roope Siikanen
Person in charge
Reijo Manninen
Groups
-
22BIOTB
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
12.12.2023 - 07.01.2024
Timing
08.01.2024 - 30.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
- Roope Siikanen
Person in charge
Reijo Manninen
Groups
-
23BIOTA
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2023 - 22.01.2024
Timing
08.01.2024 - 07.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
23AI253
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
22.11.2023 - 11.01.2024
Timing
01.01.2024 - 26.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Reijo Manninen
- Anne Leppänen
- Roope Siikanen
Person in charge
Reijo Manninen
Groups
-
22I112A
-
22I112B
-
22I112C
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
22.11.2023 - 11.01.2024
Timing
01.01.2024 - 22.03.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Laboratory Engineering
Teachers
- Lauri Judin
- Reijo Manninen
Person in charge
Reijo Manninen
Groups
-
23LATE
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2023 - 15.01.2024
Timing
01.01.2024 - 05.05.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Lauri Judin
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
22I131
-
22I228A
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2023 - 15.01.2024
Timing
01.01.2024 - 05.05.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Lauri Judin
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
22I132
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
07.06.2023 - 08.09.2023
Timing
04.09.2023 - 15.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Laboratory Engineering
Teachers
- Reijo Manninen
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
23LATELAB
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2023 - 17.09.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
- Noora Erkkilä
Person in charge
Anne Leppänen
Groups
-
22I231A
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2023 - 17.09.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
- Noora Erkkilä
Person in charge
Anne Leppänen
Groups
-
22I231B
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.08.2023 - 01.09.2023
Timing
28.08.2023 - 31.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Sami Suhonen
- Noora Erkkilä
Person in charge
Sami Suhonen
Groups
-
22I253
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.08.2023 - 18.09.2023
Timing
01.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
22I254
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2023 - 17.09.2023
Timing
01.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
22AI112P
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
23.11.2022 - 05.01.2023
Timing
09.01.2023 - 14.04.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
21BIOTB
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
23.11.2022 - 05.01.2023
Timing
09.01.2023 - 30.04.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
- Roope Siikanen
Person in charge
Reijo Manninen
Groups
-
22BIOTA
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2022 - 11.01.2023
Timing
01.01.2023 - 03.05.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Reijo Manninen
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
21I112A
-
21I112B
-
21I112C
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
23.11.2022 - 11.01.2023
Timing
01.01.2023 - 28.04.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Laboratory Engineering
Teachers
- Reijo Manninen
- Tuomo Nieminen
Person in charge
Reijo Manninen
Groups
-
22LATE
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2022 - 15.01.2023
Timing
01.01.2023 - 31.07.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Lauri Judin
- Roope Siikanen
Person in charge
Lauri Judin
Groups
-
21I131
-
21I228A
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2022 - 15.01.2023
Timing
01.01.2023 - 31.07.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Lauri Judin
Person in charge
Lauri Judin
Groups
-
21I132
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2022 - 31.08.2022
Timing
29.08.2022 - 19.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 45
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lauri Judin
- Reijo Manninen
- Anne Leppänen
Person in charge
Reijo Manninen
Groups
-
21I231B
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2022 - 02.09.2022
Timing
29.08.2022 - 19.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Reijo Manninen
- Anne Leppänen
- Tuomo Nieminen
Person in charge
Anne Leppänen
Groups
-
21I231A
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
30.07.2022 - 28.08.2022
Timing
29.08.2022 - 16.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in ICT Engineering
Teachers
- Reijo Manninen
- Juho Tiili
Person in charge
Hanna Kinnari-Korpela
Groups
-
21TIETOA
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
30.07.2022 - 12.09.2022
Timing
29.08.2022 - 23.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in ICT Engineering
Teachers
- Roope Siikanen
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
21TIETOB
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.08.2022 - 19.09.2022
Timing
29.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
1 - 45
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Lauri Judin
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
21I253
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.09.2022
Timing
01.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Lauri Judin
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
21AI112
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.08.2022 - 19.09.2022
Timing
01.08.2022 - 07.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
1 - 45
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Lauri Judin
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
21I254
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 14.01.2022
Timing
01.01.2022 - 31.07.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Lauri Judin
- Roope Siikanen
Person in charge
Lauri Judin
Groups
-
21BIOTA
-
20BIOTB
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 13.01.2022
Timing
01.01.2022 - 30.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
20I112A
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 11.01.2022
Timing
01.01.2022 - 31.07.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Lauri Judin
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
20I112B
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 11.01.2022
Timing
01.01.2022 - 31.05.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Reijo Manninen
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
20I112C
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
16.11.2021 - 05.01.2022
Timing
01.01.2022 - 29.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Laboratory Engineering
Teachers
- Reijo Manninen
- Pasi Arvela
Person in charge
Pasi Arvela
Groups
-
21LATE
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 31.07.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
1 - 30
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Lauri Judin
Person in charge
Lauri Judin
Groups
-
20AI254
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 11.01.2022
Timing
01.01.2022 - 30.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
20AUTOA
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 11.01.2022
Timing
01.01.2022 - 30.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Anne Leppänen
- Tuomo Nieminen
Person in charge
Anne Leppänen
Groups
-
20AUTOB
Objectives (course unit)
Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements
Content (course unit)
Measurements of students own technical area
Reporting of laboratory works made
Project learning applications
Prerequisites (course unit)
Basics of Measuring and Reporting
Further information (course unit)
Alternative ways for project learning implementations
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.
Assessment criteria, good (3-4) (course unit)
Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.
Assessment criteria, excellent (5) (course unit)
Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5