Laboratories of Construction PhysicsLaajuus (2 cr)
Code: 5N00EI66
Credits
2 op
Objectives
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail
Fail: Not all required assignments are fulfilled or student has been absent
Enrolment period
01.12.2023 - 22.01.2024
Timing
01.01.2024 - 30.04.2024
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Noora Erkkilä
Person in charge
Anne Leppänen
Groups
-
23RTA
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2023 - 22.01.2024
Timing
01.01.2024 - 30.04.2024
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Noora Erkkilä
Person in charge
Anne Leppänen
Groups
-
23RTB
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2023 - 22.01.2024
Timing
01.01.2024 - 30.04.2024
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Noora Erkkilä
Person in charge
Anne Leppänen
Groups
-
23RTC
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2023 - 22.01.2024
Timing
01.01.2024 - 30.04.2024
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Noora Erkkilä
Person in charge
Anne Leppänen
Groups
-
23RTD
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
23AI371
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
02.12.2022 - 15.02.2023
Timing
01.01.2023 - 03.05.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Anne Leppänen
Groups
-
22RTB
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
02.12.2022 - 15.02.2023
Timing
01.01.2023 - 31.07.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Lauri Judin
- Anne Leppänen
Person in charge
Lauri Judin
Groups
-
22RTC
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2022 - 22.01.2023
Timing
01.01.2023 - 03.05.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Lauri Judin
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
22RTA
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2022 - 22.01.2023
Timing
01.01.2023 - 31.07.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
22RTD
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 29.04.2022
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
21AI351
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
02.12.2021 - 15.02.2022
Timing
01.01.2022 - 29.04.2022
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Jari Puranen
Person in charge
Anne Leppänen
Groups
-
21RTA
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 29.04.2022
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
21RTB
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 15.05.2022
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Tuomo Nieminen
- Pasi Arvela
Person in charge
Tuomo Nieminen
Groups
-
21RTC
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 15.05.2022
Credits
2 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Tuomo Nieminen
- Pasi Arvela
Person in charge
Pasi Arvela
Groups
-
21RTD
Objectives (course unit)
Student is able to
- conduct a measurement task
- write a measurement data sheet
- calculate the results of the measurement
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements, Calculations of the results, error analysis. Drawing up appropriate technical reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has accomplished all required learning tasks. In the reports, the measuring methods and results are presented, but text is immature. The structure and analysis may contain some errors.
Assessment criteria, good (3-4) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Analyses and results are correct, but the text, explanations and comments ares sparse. Student is able to use visual elements and references.
Assessment criteria, excellent (5) (course unit)
The measurements are properly completed and reports are written according to the reporting guidelines. Working has been active and student shows ability to work both individually and in group. Analyses and results are correct and the text is fluent, transparent and comprehensive. Student demonstrates to understand the methods and their limitations and the connection to engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent
Assessment scale
0-5