Skip to main content

Laboratory Works of PhysicsLaajuus (3 cr)

Code: 5N00EI72

Credits

3 op

Objectives

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites

Basics of Measuring and Reporting

Assessment criteria, satisfactory (1-2)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail

Fail: Not all required assignments are fulfilled or student has been absent.

Further information

Alternative ways for project learning implementations

Enrolment period

02.07.2024 - 02.09.2024

Timing

02.09.2024 - 01.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, Electrical Systems
Teachers
  • Jari Puranen
  • Tuomo Nieminen
Person in charge

Jari Puranen

Groups
  • 23I254

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2024 - 08.09.2024

Timing

02.09.2024 - 15.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Anne Leppänen
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 23I253

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

10.06.2024 - 01.09.2024

Timing

26.08.2024 - 20.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 23I231A

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

10.06.2024 - 10.09.2024

Timing

26.08.2024 - 17.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 23I231B

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

07.06.2024 - 08.09.2024

Timing

01.08.2024 - 17.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 23AI112

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2023 - 19.01.2024

Timing

08.01.2024 - 26.05.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 22AI231

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

12.12.2023 - 10.01.2024

Timing

08.01.2024 - 12.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
  • Roope Siikanen
Person in charge

Reijo Manninen

Groups
  • 22BIOTB

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

12.12.2023 - 07.01.2024

Timing

08.01.2024 - 30.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
  • Roope Siikanen
Person in charge

Reijo Manninen

Groups
  • 23BIOTA

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2023 - 22.01.2024

Timing

08.01.2024 - 07.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Jari Puranen
Person in charge

Jari Puranen

Groups
  • 23AI253

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

22.11.2023 - 11.01.2024

Timing

01.01.2024 - 26.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Reijo Manninen
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Reijo Manninen

Groups
  • 22I112A
  • 22I112B
  • 22I112C

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

22.11.2023 - 11.01.2024

Timing

01.01.2024 - 22.03.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Laboratory Engineering
Teachers
  • Lauri Judin
  • Reijo Manninen
Person in charge

Reijo Manninen

Groups
  • 23LATE

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2023 - 15.01.2024

Timing

01.01.2024 - 05.05.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Lauri Judin
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 22I131
  • 22I228A

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2023 - 15.01.2024

Timing

01.01.2024 - 05.05.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Lauri Judin
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 22I132

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

07.06.2023 - 08.09.2023

Timing

04.09.2023 - 15.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Degree programmes
  • Degree Programme in Laboratory Engineering
Teachers
  • Reijo Manninen
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 23LATELAB

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2023 - 17.09.2023

Timing

28.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
  • Noora Erkkilä
Person in charge

Anne Leppänen

Groups
  • 22I231A

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2023 - 17.09.2023

Timing

28.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Anne Leppänen
  • Noora Erkkilä
Person in charge

Anne Leppänen

Groups
  • 22I231B

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.08.2023 - 01.09.2023

Timing

28.08.2023 - 31.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Sami Suhonen
  • Noora Erkkilä
Person in charge

Sami Suhonen

Groups
  • 22I253

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.08.2023 - 18.09.2023

Timing

01.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, Electrical Systems
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Roope Siikanen

Groups
  • 22I254

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2023 - 17.09.2023

Timing

01.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 22AI112P

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

23.11.2022 - 05.01.2023

Timing

09.01.2023 - 14.04.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
  • Roope Siikanen
Person in charge

Roope Siikanen

Groups
  • 21BIOTB

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

23.11.2022 - 05.01.2023

Timing

09.01.2023 - 30.04.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
  • Roope Siikanen
Person in charge

Reijo Manninen

Groups
  • 22BIOTA

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 03.05.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Reijo Manninen
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 21I112A
  • 21I112B
  • 21I112C

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

23.11.2022 - 11.01.2023

Timing

01.01.2023 - 28.04.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Laboratory Engineering
Teachers
  • Reijo Manninen
  • Tuomo Nieminen
Person in charge

Reijo Manninen

Groups
  • 22LATE

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2022 - 15.01.2023

Timing

01.01.2023 - 31.07.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Lauri Judin
  • Roope Siikanen
Person in charge

Lauri Judin

Groups
  • 21I131
  • 21I228A

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2022 - 15.01.2023

Timing

01.01.2023 - 31.07.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Lauri Judin
Person in charge

Lauri Judin

Groups
  • 21I132

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2022 - 31.08.2022

Timing

29.08.2022 - 19.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 45

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Lauri Judin
  • Reijo Manninen
  • Anne Leppänen
Person in charge

Reijo Manninen

Groups
  • 21I231B

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2022 - 02.09.2022

Timing

29.08.2022 - 19.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Reijo Manninen
  • Anne Leppänen
  • Tuomo Nieminen
Person in charge

Anne Leppänen

Groups
  • 21I231A

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

30.07.2022 - 28.08.2022

Timing

29.08.2022 - 16.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in ICT Engineering
Teachers
  • Reijo Manninen
  • Juho Tiili
Person in charge

Hanna Kinnari-Korpela

Groups
  • 21TIETOA

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

30.07.2022 - 12.09.2022

Timing

29.08.2022 - 23.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in ICT Engineering
Teachers
  • Roope Siikanen
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 21TIETOB

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.08.2022 - 19.09.2022

Timing

29.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Building Services Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

1 - 45

Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Lauri Judin
  • Roope Siikanen
Person in charge

Roope Siikanen

Groups
  • 21I253

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2022 - 11.09.2022

Timing

01.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Lauri Judin
  • Anne Leppänen
Person in charge

Anne Leppänen

Groups
  • 21AI112

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.08.2022 - 19.09.2022

Timing

01.08.2022 - 07.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Building Services Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

1 - 45

Degree programmes
  • Degree Programme in Building Services Engineering, Electrical Systems
Teachers
  • Lauri Judin
  • Jari Puranen
Person in charge

Jari Puranen

Groups
  • 21I254

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 14.01.2022

Timing

01.01.2022 - 31.07.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Lauri Judin
  • Roope Siikanen
Person in charge

Lauri Judin

Groups
  • 21BIOTA
  • 20BIOTB

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 13.01.2022

Timing

01.01.2022 - 30.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 20I112A

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 11.01.2022

Timing

01.01.2022 - 31.07.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Lauri Judin
  • Roope Siikanen
Person in charge

Roope Siikanen

Groups
  • 20I112B

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 11.01.2022

Timing

01.01.2022 - 31.05.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Reijo Manninen
  • Roope Siikanen
Person in charge

Roope Siikanen

Groups
  • 20I112C

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

16.11.2021 - 05.01.2022

Timing

01.01.2022 - 29.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Laboratory Engineering
Teachers
  • Reijo Manninen
  • Pasi Arvela
Person in charge

Pasi Arvela

Groups
  • 21LATE

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2021 - 17.01.2022

Timing

01.01.2022 - 31.07.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Building Services Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

1 - 30

Degree programmes
  • Degree Programme in Building Services Engineering
Teachers
  • Lauri Judin
Person in charge

Lauri Judin

Groups
  • 20AI254

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 11.01.2022

Timing

01.01.2022 - 30.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Anne Leppänen
  • Roope Siikanen
Person in charge

Anne Leppänen

Groups
  • 20AUTOA

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 11.01.2022

Timing

01.01.2022 - 30.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Anne Leppänen
  • Tuomo Nieminen
Person in charge

Anne Leppänen

Groups
  • 20AUTOB

Objectives (course unit)

Students are able to
- make controlled measurements
- make plans of measurements
- evaluate reliability of measurements
- evaluate importance of measurements

Content (course unit)

Measurements of students own technical area
Reporting of laboratory works made
Project learning applications

Prerequisites (course unit)

Basics of Measuring and Reporting

Further information (course unit)

Alternative ways for project learning implementations

Assessment criteria, satisfactory (1-2) (course unit)

Student has accomplished all required learning tasks. Student is able to plan and carry out measurements in physics and his/her engineering field. Reports may contain small errors or are slightly inadequate.The reports don't fully follow reporting guidelines.

Assessment criteria, good (3-4) (course unit)

Student is able to plan and carry out measurements in physics and his/her engineering field. Student is able to report the results according to the guidelines and so that all important aspects are included. Report forms a coherent entity.

Assessment criteria, excellent (5) (course unit)

Student is able to plan and carry out measurements independently in physics and his/her engineering field.Student is able to report the results well and clearly following the reporting guidelines. Reports form a coherent and comprehensive entity that covers all relevant aspects and topics.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5