Skip to main content

Basics of Measuring and ReportingLaajuus (3 cr)

Code: 5N00EI71

Credits

3 op

Objectives

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail

Fail: Not all required assignments are fulfilled or student has been absent.

Enrolment period

27.07.2024 - 03.09.2024

Timing

02.09.2024 - 20.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Sini Ahlberg
  • Reijo Manninen
  • Eija Lähteenmäki
  • Noora Erkkilä
Person in charge

Päivi Viitaharju

Groups
  • 24BIOTA

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

10.06.2024 - 31.08.2024

Timing

19.08.2024 - 20.12.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Languages and Communication

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Kirsi-Maria Rinneheimo
  • Lotta Markkula
  • Roope Siikanen
  • Noora Erkkilä
Person in charge

Jarkko Lehtonen

Groups
  • 24AI231

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

31.01.2024 - 30.03.2024

Timing

22.04.2024 - 19.05.2024

Credits

3 op

Virtual portion

2 op

Mode of delivery

34 % Contact teaching, 66 % Online learning

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Teachers
  • Reijo Manninen
  • Lotta Markkula
  • Anne Leppänen
  • Roope Siikanen
  • Sara Nortunen
Person in charge

Lotta Markkula

Groups
  • 24AVOLVTEKK
    AvoinAMK, Lukioväylä tekniikka K2024
  • AVOINAMK
  • LAM

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2023 - 31.12.2023

Timing

08.01.2024 - 23.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Languages and Communication

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Lauri Judin
  • Ulla Miekkala
  • Anne Leppänen
  • Johanna Granlund
Person in charge

Jarkko Lehtonen

Groups
  • 23I231B

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2023 - 07.01.2024

Timing

08.01.2024 - 30.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Lauri Judin
  • Pia Ruokonen-Kaukolinna
  • Roope Siikanen
  • Marita Mäki
Person in charge

Antti Mäkinen

Groups
  • 23I253

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2023 - 07.01.2024

Timing

08.01.2024 - 30.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, Electrical Systems
Teachers
  • Lauri Judin
  • Roope Siikanen
  • Pia Ruokonen-Kaukolinna
  • Mari Touronen
Person in charge

Lauri Judin

Groups
  • 23I254

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2023 - 31.12.2023

Timing

01.01.2024 - 30.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Anne Leppänen
  • Sara Nortunen
  • Tuomo Nieminen
  • Annina Korpela
Groups
  • 23AUTOB

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2023 - 31.12.2023

Timing

01.01.2024 - 30.04.2024

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Kirsi-Maria Rinneheimo
  • Anne Leppänen
  • Tuomo Nieminen
  • Johanna Granlund
Person in charge

Johanna Granlund

Groups
  • 23AUTOA

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

07.06.2023 - 31.08.2023

Timing

29.08.2023 - 31.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Laboratory Engineering
Teachers
  • Reijo Manninen
  • Roope Siikanen
  • Eija Lähteenmäki
  • Sara Nortunen
Person in charge

Reijo Manninen

Groups
  • 23LATE

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2023 - 03.09.2023

Timing

28.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Lauri Judin
  • Lotta Markkula
  • Roope Siikanen
  • Ulla Miekkala
Person in charge

Lauri Judin

Groups
  • 23I231A

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

07.06.2023 - 30.08.2023

Timing

28.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
  • Eija Lähteenmäki
  • Roope Siikanen
  • Ulla Miekkala
Person in charge

Roope Siikanen

Groups
  • 23BIOTA

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

07.06.2023 - 30.08.2023

Timing

28.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Lauri Judin
  • Eija Lähteenmäki
  • Roope Siikanen
  • Jukka Suominen
Person in charge

Roope Siikanen

Groups
  • 23BIOTB

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.08.2023 - 31.08.2023

Timing

21.08.2023 - 17.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Lauri Judin
  • Kirsi-Maria Rinneheimo
  • Roope Siikanen
  • Mari Touronen
Person in charge

Roope Siikanen

Groups
  • 23AI253

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

05.01.2023 - 05.03.2023

Timing

10.04.2023 - 28.05.2023

Credits

3 op

Virtual portion

1 op

Mode of delivery

67 % Contact teaching, 33 % Online learning

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Teachers
  • Anne Leppänen
  • Roope Siikanen
  • Sara Nortunen
  • Päivi Suominen-Tontti
  • Ulla Miekkala
Person in charge

Roope Siikanen

Groups
  • AVOINAMK
  • LAM

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

23.11.2022 - 14.01.2023

Timing

19.01.2023 - 28.04.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Mathematics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Laboratory Engineering
Teachers
  • Reijo Manninen
  • Eija Lähteenmäki
  • Sara Nortunen
  • Juho Tiili
Person in charge

Reijo Manninen

Groups
  • 23LATELAB

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2022 - 22.01.2023

Timing

09.01.2023 - 28.05.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Lauri Judin
  • Marita Mäki
  • Roope Siikanen
  • Jukka Suominen
Person in charge

Roope Siikanen

Groups
  • 22AI231

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2022 - 14.01.2023

Timing

01.01.2023 - 31.07.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Electrical and Automation Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Lauri Judin
  • Lotta Markkula
  • Roope Siikanen
  • Ulla Miekkala
Person in charge

Roope Siikanen

Groups
  • 22I231B

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2022 - 17.01.2023

Timing

01.01.2023 - 31.07.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Building Services Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, Electrical Systems
Teachers
  • Lauri Judin
  • Roope Siikanen
  • Pia Ruokonen-Kaukolinna
  • Mari Touronen
  • Marja-Liisa Timperi
Person in charge

Lauri Judin

Groups
  • 22I254

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2022 - 17.01.2023

Timing

01.01.2023 - 31.07.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Marita Mäki
  • Lauri Judin
  • Kirsi-Maria Rinneheimo
  • Roope Siikanen
Person in charge

Roope Siikanen

Groups
  • 22I253

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2022 - 15.01.2023

Timing

01.01.2023 - 30.04.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Kirsi-Maria Rinneheimo
  • Anne Leppänen
  • Päivi Suominen-Tontti
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 22AUTOA

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2022 - 15.01.2023

Timing

01.01.2023 - 03.05.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Anne Leppänen
  • Eija Lähteenmäki
  • Sara Nortunen
  • Tuomo Nieminen
Person in charge

Anne Leppänen

Groups
  • 22AUTOB

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.08.2022 - 05.09.2022

Timing

29.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Lotta Markkula
  • Roope Siikanen
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 22I231A

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.07.2022 - 31.08.2022

Timing

29.08.2022 - 15.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Laboratory Engineering
Teachers
  • Lauri Judin
  • Anja Kuronen
  • Reijo Manninen
  • Eija Lähteenmäki
Person in charge

Reijo Manninen

Groups
  • 22LATE

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

23.07.2022 - 02.09.2022

Timing

22.08.2022 - 15.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
  • Eija Lähteenmäki
  • Jukka Suominen
  • Juho Tiili
Person in charge

Juho Tiili

Groups
  • 22BIOTB

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

23.07.2022 - 01.09.2022

Timing

22.08.2022 - 15.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Bioproduct Engineering
Teachers
  • Reijo Manninen
  • Eija Lähteenmäki
  • Juho Tiili
  • Sara Nortunen
Person in charge

Reijo Manninen

Groups
  • 22BIOTA

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

15.02.2022 - 10.03.2022

Timing

08.04.2022 - 09.05.2022

Credits

3 op

Virtual portion

1 op

Mode of delivery

67 % Contact teaching, 33 % Online learning

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Teachers
  • Sara Nortunen
  • Päivi Suominen-Tontti
  • Pasi Arvela
Person in charge

Pasi Arvela

Groups
  • AVOINAMK

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

15.02.2022 - 31.03.2022

Timing

04.04.2022 - 31.05.2022

Credits

3 op

Virtual portion

3 op

Mode of delivery

Online learning

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Teachers
  • Lotta Markkula
  • Jukka Suominen
  • Pasi Arvela
Person in charge

Pasi Arvela

Groups
  • AVOINAMK

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

30.01.2022 - 31.03.2022

Timing

01.04.2022 - 31.05.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 30

Teachers
  • Lotta Markkula
  • Sara Nortunen
  • Pasi Arvela
Person in charge

Pasi Arvela

Groups
  • AVOINAMK

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 10.01.2022

Timing

10.01.2022 - 29.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 48

Degree programmes
  • Degree Programme in Electrical Engineering
Teachers
  • Lauri Judin
  • Maiju Paldán
  • Roope Siikanen
  • Ulla Miekkala
Person in charge

Ulla Miekkala

Groups
  • 21I231B

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 31.12.2021

Timing

01.01.2022 - 30.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Anne Leppänen
  • Pia Ruokonen-Kaukolinna
  • Tuomo Nieminen
  • Annina Korpela
Person in charge

Anne Leppänen

Groups
  • 21AUTOA

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

02.12.2021 - 31.12.2021

Timing

01.01.2022 - 01.05.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

TAMK Mathematics and Physics

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Vehicle Engineering
Teachers
  • Lotta Markkula
  • Anne Leppänen
  • Sara Nortunen
  • Tuomo Nieminen
Person in charge

Tuomo Nieminen

Groups
  • 21AUTOB

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2021 - 17.01.2022

Timing

01.01.2022 - 29.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Building Services Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, Electrical Systems
Teachers
  • Anne Leppänen
  • Pia Ruokonen-Kaukolinna
  • Jari Puranen
  • Mari Touronen
  • Marja-Liisa Timperi
Person in charge

Jari Puranen

Groups
  • 21I254

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5

Enrolment period

01.12.2021 - 17.01.2022

Timing

01.01.2022 - 29.04.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Building Services Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Building Services Engineering, HVAC Systems
Teachers
  • Kirsi-Maria Rinneheimo
  • Anne Leppänen
  • Jari Puranen
  • Mari Touronen
  • Marja-Liisa Timperi
  • Annina Korpela
Person in charge

Anne Leppänen

Groups
  • 21I253

Objectives (course unit)

Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards

Content (course unit)

Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.

Assessment criteria, satisfactory (1-2) (course unit)

Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.

Assessment criteria, good (3-4) (course unit)

The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.

Assessment criteria, excellent (5) (course unit)

The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.

Assessment criteria, pass/fail (course unit)

Fail: Not all required assignments are fulfilled or student has been absent.

Assessment scale

0-5