Basics of Measuring and ReportingLaajuus (3 cr)
Code: 5N00EI71
Credits
3 op
Objectives
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail
Fail: Not all required assignments are fulfilled or student has been absent.
Enrolment period
27.07.2024 - 03.09.2024
Timing
02.09.2024 - 20.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
Built Environment and Bioeconomy
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Sini Ahlberg
- Reijo Manninen
- Eija Lähteenmäki
- Noora Erkkilä
Person in charge
Päivi Viitaharju
Groups
-
24BIOTA
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
10.06.2024 - 31.08.2024
Timing
19.08.2024 - 20.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Kirsi-Maria Rinneheimo
- Lotta Markkula
- Roope Siikanen
- Noora Erkkilä
Person in charge
Jarkko Lehtonen
Groups
-
24AI231
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
31.01.2024 - 30.03.2024
Timing
22.04.2024 - 19.05.2024
Credits
3 op
Virtual portion
2 op
Mode of delivery
34 % Contact teaching, 66 % Distance learning
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Teachers
- Reijo Manninen
- Lotta Markkula
- Anne Leppänen
- Roope Siikanen
- Sara Nortunen
Person in charge
Lotta Markkula
Groups
-
24AVOLVTEKKAvoinAMK, Lukioväylä tekniikka K2024
-
AVOINAMK
-
LAM
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2023 - 31.12.2023
Timing
08.01.2024 - 23.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lauri Judin
- Ulla Miekkala
- Anne Leppänen
- Johanna Granlund
Person in charge
Jarkko Lehtonen
Groups
-
23I231B
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2023 - 07.01.2024
Timing
08.01.2024 - 30.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Lauri Judin
- Pia Ruokonen-Kaukolinna
- Roope Siikanen
- Marita Mäki
Person in charge
Antti Mäkinen
Groups
-
23I253
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2023 - 07.01.2024
Timing
08.01.2024 - 30.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Lauri Judin
- Roope Siikanen
- Pia Ruokonen-Kaukolinna
- Mari Touronen
Person in charge
Lauri Judin
Groups
-
23I254
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2023 - 31.12.2023
Timing
01.01.2024 - 30.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Anne Leppänen
- Sara Nortunen
- Tuomo Nieminen
- Annina Korpela
Groups
-
23AUTOB
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2023 - 31.12.2023
Timing
01.01.2024 - 30.04.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Kirsi-Maria Rinneheimo
- Anne Leppänen
- Tuomo Nieminen
- Johanna Granlund
Person in charge
Johanna Granlund
Groups
-
23AUTOA
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
07.06.2023 - 31.08.2023
Timing
29.08.2023 - 31.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Laboratory Engineering
Teachers
- Reijo Manninen
- Roope Siikanen
- Eija Lähteenmäki
- Sara Nortunen
Person in charge
Reijo Manninen
Groups
-
23LATE
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2023 - 03.09.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lauri Judin
- Lotta Markkula
- Roope Siikanen
- Ulla Miekkala
Person in charge
Lauri Judin
Groups
-
23I231A
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
07.06.2023 - 30.08.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
- Eija Lähteenmäki
- Roope Siikanen
- Ulla Miekkala
Person in charge
Roope Siikanen
Groups
-
23BIOTA
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
07.06.2023 - 30.08.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Lauri Judin
- Eija Lähteenmäki
- Roope Siikanen
- Jukka Suominen
Person in charge
Roope Siikanen
Groups
-
23BIOTB
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.08.2023 - 31.08.2023
Timing
21.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Lauri Judin
- Kirsi-Maria Rinneheimo
- Roope Siikanen
- Mari Touronen
Person in charge
Roope Siikanen
Groups
-
23AI253
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
05.01.2023 - 05.03.2023
Timing
10.04.2023 - 28.05.2023
Credits
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Teachers
- Anne Leppänen
- Roope Siikanen
- Sara Nortunen
- Päivi Suominen-Tontti
- Ulla Miekkala
Person in charge
Roope Siikanen
Groups
-
AVOINAMK
-
LAM
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
23.11.2022 - 14.01.2023
Timing
19.01.2023 - 28.04.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Mathematics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Laboratory Engineering
Teachers
- Reijo Manninen
- Eija Lähteenmäki
- Sara Nortunen
- Juho Tiili
Person in charge
Reijo Manninen
Groups
-
23LATELAB
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2022 - 22.01.2023
Timing
09.01.2023 - 28.05.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lauri Judin
- Marita Mäki
- Roope Siikanen
- Jukka Suominen
Person in charge
Roope Siikanen
Groups
-
22AI231
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2022 - 14.01.2023
Timing
01.01.2023 - 31.07.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lauri Judin
- Lotta Markkula
- Roope Siikanen
- Ulla Miekkala
Person in charge
Roope Siikanen
Groups
-
22I231B
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2022 - 17.01.2023
Timing
01.01.2023 - 31.07.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Lauri Judin
- Roope Siikanen
- Pia Ruokonen-Kaukolinna
- Mari Touronen
- Marja-Liisa Timperi
Person in charge
Lauri Judin
Groups
-
22I254
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2022 - 17.01.2023
Timing
01.01.2023 - 31.07.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Marita Mäki
- Lauri Judin
- Kirsi-Maria Rinneheimo
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
22I253
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2022 - 15.01.2023
Timing
01.01.2023 - 30.04.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Kirsi-Maria Rinneheimo
- Anne Leppänen
- Päivi Suominen-Tontti
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
22AUTOA
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2022 - 15.01.2023
Timing
01.01.2023 - 03.05.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Anne Leppänen
- Eija Lähteenmäki
- Sara Nortunen
- Tuomo Nieminen
Person in charge
Anne Leppänen
Groups
-
22AUTOB
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.08.2022 - 05.09.2022
Timing
29.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lotta Markkula
- Roope Siikanen
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
22I231A
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.07.2022 - 31.08.2022
Timing
29.08.2022 - 15.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Laboratory Engineering
Teachers
- Lauri Judin
- Anja Kuronen
- Reijo Manninen
- Eija Lähteenmäki
Person in charge
Reijo Manninen
Groups
-
22LATE
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
23.07.2022 - 02.09.2022
Timing
22.08.2022 - 15.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
- Eija Lähteenmäki
- Jukka Suominen
- Juho Tiili
Person in charge
Juho Tiili
Groups
-
22BIOTB
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
23.07.2022 - 01.09.2022
Timing
22.08.2022 - 15.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
- Eija Lähteenmäki
- Juho Tiili
- Sara Nortunen
Person in charge
Reijo Manninen
Groups
-
22BIOTA
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
15.02.2022 - 10.03.2022
Timing
08.04.2022 - 09.05.2022
Credits
3 op
Virtual portion
1 op
Mode of delivery
67 % Contact teaching, 33 % Distance learning
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Teachers
- Sara Nortunen
- Päivi Suominen-Tontti
- Pasi Arvela
Person in charge
Pasi Arvela
Groups
-
AVOINAMK
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
15.02.2022 - 31.03.2022
Timing
04.04.2022 - 31.05.2022
Credits
3 op
Virtual portion
3 op
Mode of delivery
Distance learning
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Teachers
- Lotta Markkula
- Jukka Suominen
- Pasi Arvela
Person in charge
Pasi Arvela
Groups
-
AVOINAMK
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
30.01.2022 - 31.03.2022
Timing
01.04.2022 - 31.05.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Teachers
- Lotta Markkula
- Sara Nortunen
- Pasi Arvela
Person in charge
Pasi Arvela
Groups
-
AVOINAMK
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 10.01.2022
Timing
10.01.2022 - 29.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 48
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lauri Judin
- Maiju Paldán
- Roope Siikanen
- Ulla Miekkala
Person in charge
Ulla Miekkala
Groups
-
21I231B
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 31.12.2021
Timing
01.01.2022 - 30.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Anne Leppänen
- Pia Ruokonen-Kaukolinna
- Tuomo Nieminen
- Annina Korpela
Person in charge
Anne Leppänen
Groups
-
21AUTOA
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
02.12.2021 - 31.12.2021
Timing
01.01.2022 - 01.05.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Lotta Markkula
- Anne Leppänen
- Sara Nortunen
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
21AUTOB
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 29.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Anne Leppänen
- Pia Ruokonen-Kaukolinna
- Jari Puranen
- Mari Touronen
- Marja-Liisa Timperi
Person in charge
Jari Puranen
Groups
-
21I254
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 29.04.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Kirsi-Maria Rinneheimo
- Anne Leppänen
- Jari Puranen
- Mari Touronen
- Marja-Liisa Timperi
- Annina Korpela
Person in charge
Anne Leppänen
Groups
-
21I253
Objectives (course unit)
Student is able to
- make a measurement task under supervision
- make a data sheet under supervision
- calculate the results of the measurement task
- make a graph representing the results
- make an appropriate error analysis
- draw up a report in accordance with standards
Content (course unit)
Measurements in students own field of technology.
Calculations of the results including linear regression. Drawing up reports about the measuring tasks.
Assessment criteria, satisfactory (1-2) (course unit)
Student has completed all required learning tasks. Reports have small errors or are incomplete in some way. Reports don't fully follow the given reporting guidelines.
Assessment criteria, good (3-4) (course unit)
The errors in reports are sparse. Student is able to supplement text with images, tables and equations. Student is able to present the final result correctly with calculated uncertainty. The text is mostly faultless. The reports follow the given reporting guidelines.
Assessment criteria, excellent (5) (course unit)
The reports follow the given reporting guidelines and student show deeper understanding in the reports. Student can reflect the quality of the measurements and final results. Student is able to relate the topics of the laboratory measurements to his/her own engineering field.
Assessment criteria, pass/fail (course unit)
Fail: Not all required assignments are fulfilled or student has been absent.
Assessment scale
0-5