Skip to main content

Product DevelopmentLaajuus (5 cr)

Code: 5K00DU93

Credits

5 op

Objectives

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Enrolment period

02.07.2024 - 31.08.2024

Timing

06.09.2024 - 13.12.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Nikander
Person in charge

Mika Nikander

Groups
  • 23AI112

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Location and time

September 2024

Exam schedules

No exam

Assessment methods and criteria

Idea creation
40% weight

Machine Directive exercise work
40% weight

Teamwork
±20% weight

Rating 0-5

Assessment scale

0-5

Teaching methods

project working
BPL
home excercises
exercises during lectures
lectures

Learning materials

Material for this implementation will be available in the Teams Class Notebook.

Student workload

Lectures 7 pcs

Practical works


Machine directive and idea creation are based on teamwork which includes also the presentation of the findings by all team members

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

NA

Practical training and working life cooperation

Visitor lecturers

There will be two practical works:
Idea creation for Comatec defined challengies
Machine Directive

Practical works are based on teamwork

Further information

Feedback on the implementation of the course is collected through the Course Feedback System.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

No participation in the defined practical works.

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

The student identifies the methods, working methods and tools of systematic product development as well as
understands the importance of creativity and ideation in product development. Take responsibility for own performance.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

The student knows the main operating models and processes of product development and is able to act independently
to use them. The student recognizes the requirements of the Machinery Directive for design work. Take responsibility and commits not only to own activities but also to the activities of the group.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

The student has a good command of all aspects of the product development process and is able to apply own skills
in various product development tasks in the development of safe and user-friendly equipment and structures.
The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and taking into account the requirements and needs of the Community and own professional sector.

Enrolment period

02.12.2023 - 14.01.2024

Timing

08.01.2024 - 30.04.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Vehicle Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Marko Rantonen
Person in charge

Marko Rantonen

Groups
  • 21I131

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Assessment methods and criteria

Lectures
Eexcecises: 2 pcs, mandatory

Assessment scale

0-5

Teaching methods

project working
home excercises
exercises during lectures
lectures

Learning materials

Material which is to be delivered during lectures
Ulrich/Eppinger: Product design and development
machine directive

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

-

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Takes responsibility for his/her own work. Working in time.
Student knows the foundations of systematic product development process, engineering methods and tools. Student recognises the meaning of innovation and generating ideas in developing products.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Takes responsibility and commits to the group activities in addition to his/her own work.
Student is familiar with meaning of product configuration, product concept, industrial design, ergonomic, principals of design methods in machine design and in launching competitive products to markets. Student applies main ideas of how to protect design rights. Student knows the requirements of machine directives concern entire product life cycle.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Can cooperate responsibly, flexibly and constructively. Develops his/her own and the group’s interaction.
Student is able to work in product development projects and can create project plans in planning phase of development project. Student knows the requirements of machine directives concern entire product life cycle and understand how to define aspects which determine that the products and structures that are safe and easy to use

Enrolment period

02.12.2023 - 11.01.2024

Timing

01.01.2024 - 31.07.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Nikander
Person in charge

Ari-Jaakko Notko

Groups
  • 22I112C

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Location and time

January 2024

Exam schedules

No exam

Assessment methods and criteria

Idea creation
40% weight

Machine Directive exercise work
40% weight

Team work
20% weight

Rating 0-5

Assessment scale

0-5

Teaching methods

project working
BPL
home excercises
exercises during lectures
lectures

Learning materials

Material for this implementation will be available in the Teams Class Notebook.

Student workload

Lectures 10 pcs

Practical works


Machine directive and idea creation are based on team work which includes also the presentation of the findings by all team members

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

NA

Practical training and working life cooperation

Visitor lecturers

There will be two practical works:
Idea creation for Comatec defined challengies
Machine Directive

Further information

Feedback on the implementation of the course is collected through the Course Feedback System.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

No participation in the defined practical works.

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

The student identifies the methods, working methods and tools of systematic product development as well as
understands the importance of creativity and ideation in product development. Take responsibility for own performance.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

The student knows the main operating models and processes of product development and is able to act independently
to use them. The student recognizes the requirements of the Machinery Directive for design work. Take responsibility and commits not only to own activities but also to the activities of the group.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

The student has a good command of all aspects of the product development process and is able to apply own skills
in various product development tasks in the development of safe and user-friendly equipment and structures.
The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and taking into account the requirements and needs of the Community and own professional sector.

Enrolment period

02.12.2023 - 11.01.2024

Timing

01.01.2024 - 31.07.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Nikander
Person in charge

Ari-Jaakko Notko

Groups
  • 22I112A

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Location and time

January 2024

Exam schedules

No exam

Assessment methods and criteria

Idea creation
40% weight

Machine Directive exercise work
40% weight

Team work
20% weight

Rating 0-5

Assessment scale

0-5

Teaching methods

project working
BPL
home excercises
exercises during lectures
lectures

Learning materials

Material for this implementation will be available in the Teams Class Notebook.

Student workload

Lectures 10 pcs

Practical works


Machine directive and idea creation are based on team work which includes also the presentation of the findings by all team members

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

NA

Practical training and working life cooperation

Visitor lecturers

There will be two practical works:
Idea creation for Comatec defined challengies
Machine Directive

Further information

Feedback on the implementation of the course is collected through the Course Feedback System.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

No participation in the defined practical works.

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

The student identifies the methods, working methods and tools of systematic product development as well as
understands the importance of creativity and ideation in product development. Take responsibility for own performance.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

The student knows the main operating models and processes of product development and is able to act independently
to use them. The student recognizes the requirements of the Machinery Directive for design work. Take responsibility and commits not only to own activities but also to the activities of the group.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

The student has a good command of all aspects of the product development process and is able to apply own skills
in various product development tasks in the development of safe and user-friendly equipment and structures.
The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and taking into account the requirements and needs of the Community and own professional sector.

Enrolment period

02.12.2023 - 11.01.2024

Timing

01.01.2024 - 31.07.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Nikander
Person in charge

Ari-Jaakko Notko

Groups
  • 22I112B

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Location and time

January 2024

Exam schedules

No exam

Assessment methods and criteria

Idea creation
40% weight

Machine Directive exercise work
40% weight

Team work
20% weight

Rating 0-5

Assessment scale

0-5

Teaching methods

project working
BPL
home excercises
exercises during lectures
lectures

Learning materials

Material for this implementation will be available in the Teams Class Notebook.

Student workload

Lectures 10 pcs

Practical works


Machine directive and idea creation are based on team work which includes also the presentation of the findings by all team members

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

NA

Practical training and working life cooperation

Visitor lecturers

There will be two practical works:
Idea creation for Comatec defined challengies
Machine Directive

Further information

Feedback on the implementation of the course is collected through the Course Feedback System.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

No participation in the defined practical works.

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

The student identifies the methods, working methods and tools of systematic product development as well as
understands the importance of creativity and ideation in product development. Take responsibility for own performance.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

The student knows the main operating models and processes of product development and is able to act independently
to use them. The student recognizes the requirements of the Machinery Directive for design work. Take responsibility and commits not only to own activities but also to the activities of the group.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

The student has a good command of all aspects of the product development process and is able to apply own skills
in various product development tasks in the development of safe and user-friendly equipment and structures.
The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and taking into account the requirements and needs of the Community and own professional sector.

Enrolment period

02.07.2023 - 11.08.2023

Timing

01.08.2023 - 31.12.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Nikander
Person in charge

Mika Nikander

Groups
  • 22AI112P

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Location and time

September 2023

Exam schedules

No exam

Assessment methods and criteria

Idea creation
40% weight

Machine Directive exercise work
40% weight

Team work
20% weight

Rating 0-5

Assessment scale

0-5

Teaching methods

project working
BPL
home excercises
exercises during lectures
lectures

Learning materials

Material for this implementation will be available in the Teams Class Notebook.

Student workload

Lectures 7 pcs

Practical works


Machine directive and idea creation are based on team work which includes also the presentation of the findings by all team members

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

NA

Practical training and working life cooperation

Visitor lecturers

There will be two practical works:
Idea creation for Comatec defined challengies
Machine Directive

Further information

Feedback on the implementation of the course is collected through the Course Feedback System.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

No participation in the defined practical works.

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

The student identifies the methods, working methods and tools of systematic product development as well as
understands the importance of creativity and ideation in product development. Take responsibility for own performance.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

The student knows the main operating models and processes of product development and is able to act independently
to use them. The student recognizes the requirements of the Machinery Directive for design work. Take responsibility and commits not only to own activities but also to the activities of the group.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

The student has a good command of all aspects of the product development process and is able to apply own skills
in various product development tasks in the development of safe and user-friendly equipment and structures.
The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and taking into account the requirements and needs of the Community and own professional sector.

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 18.04.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Ari-Jaakko Notko
Person in charge

Ari-Jaakko Notko

Groups
  • 21I112A

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Assessment methods and criteria

Lectures
Eexcecises: 2 pcs, mandatory

Assessment scale

0-5

Teaching methods

project working
home excercises
exercises during lectures
lectures

Learning materials

Material which is to be delivered during lectures
Ulrich/Eppinger: Product design and development
machine directive

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

-

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Takes responsibility for his/her own work. Working in time.
Student knows the foundations of systematic product development process, engineering methods and tools. Student recognises the meaning of innovation and generating ideas in developing products.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Takes responsibility and commits to the group activities in addition to his/her own work.
Student is familiar with meaning of product configuration, product concept, industrial design, ergonomic, principals of design methods in machine design and in launching competitive products to markets. Student applies main ideas of how to protect design rights. Student knows the requirements of machine directives concern entire product life cycle.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Can cooperate responsibly, flexibly and constructively. Develops his/her own and the group’s interaction.
Student is able to work in product development projects and can create project plans in planning phase of development project. Student knows the requirements of machine directives concern entire product life cycle and understand how to define aspects which determine that the products and structures that are safe and easy to use

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 18.04.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Ari-Jaakko Notko
Person in charge

Ari-Jaakko Notko

Groups
  • 21I112B

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Assessment methods and criteria

Lectures
Eexcecises: 2 pcs, mandatory

Assessment scale

0-5

Teaching methods

project working
home excercises
exercises during lectures
lectures

Learning materials

Material which is to be delivered during lectures
Ulrich/Eppinger: Product design and development
machine directive

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

-

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Takes responsibility for his/her own work. Working in time.
Student knows the foundations of systematic product development process, engineering methods and tools. Student recognises the meaning of innovation and generating ideas in developing products.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Takes responsibility and commits to the group activities in addition to his/her own work.
Student is familiar with meaning of product configuration, product concept, industrial design, ergonomic, principals of design methods in machine design and in launching competitive products to markets. Student applies main ideas of how to protect design rights. Student knows the requirements of machine directives concern entire product life cycle.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Can cooperate responsibly, flexibly and constructively. Develops his/her own and the group’s interaction.
Student is able to work in product development projects and can create project plans in planning phase of development project. Student knows the requirements of machine directives concern entire product life cycle and understand how to define aspects which determine that the products and structures that are safe and easy to use

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 18.04.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Ari-Jaakko Notko
Person in charge

Ari-Jaakko Notko

Groups
  • 21I112C

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Assessment methods and criteria

Lectures
Eexcecises: 2 pcs, mandatory

Assessment scale

0-5

Teaching methods

project working
home excercises
exercises during lectures
lectures

Learning materials

Material which is to be delivered during lectures
Ulrich/Eppinger: Product design and development
machine directive

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

-

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Takes responsibility for his/her own work. Working in time.
Student knows the foundations of systematic product development process, engineering methods and tools. Student recognises the meaning of innovation and generating ideas in developing products.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Takes responsibility and commits to the group activities in addition to his/her own work.
Student is familiar with meaning of product configuration, product concept, industrial design, ergonomic, principals of design methods in machine design and in launching competitive products to markets. Student applies main ideas of how to protect design rights. Student knows the requirements of machine directives concern entire product life cycle.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Can cooperate responsibly, flexibly and constructively. Develops his/her own and the group’s interaction.
Student is able to work in product development projects and can create project plans in planning phase of development project. Student knows the requirements of machine directives concern entire product life cycle and understand how to define aspects which determine that the products and structures that are safe and easy to use

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 31.07.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Vehicle Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Nikander
Person in charge

Mika Nikander

Groups
  • 20I131

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Location and time

January 2022/week 2

Exam schedules

No exam. The coarse evaluation will be made based on the exercises.

Assessment scale

0-5

Teaching methods

project working
BPL
excercises
Local lectures

Learning materials

Material for this implementation will be available in the Teams Class Notebook.

Student workload

Lectures

Practical works

Avant 6e is a team work

Machine directive is a team work which includes also the presentation of the findings by all team members

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

NA

Practical training and working life cooperation

Visitor lecturers

There will be two practical works:
Avant 6e
Machine Directive

Further information

Feedback on the implementation of the course is collected through the Course Feedback System.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

Avant 6e exercise work
50% weight

Machine Directive exercise work
40% weight

Group work
10% weight

Rating 0-5

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

The student identifies the methods, working methods and tools of systematic product development as well as
understands the importance of creativity and ideation in product development. Take responsibility for own performance.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

The student knows the main operating models and processes of product development and is able to act independently
to use them. The student recognizes the requirements of the Machinery Directive for design work. Take responsibility and commits not only to own activities but also to the activities of the group.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

The student has a good command of all aspects of the product development process and is able to apply own skills
in various product development tasks in the development of safe and user-friendly equipment and structures.
The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and taking into account the requirements and needs of the Community and own professional sector.

Enrolment period

02.12.2021 - 10.01.2022

Timing

10.01.2022 - 29.04.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Matti Peltola
Person in charge

Matti Peltola

Groups
  • 20I112A

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Assessment methods and criteria

Lectures
Eexcecises: 2 pcs, mandatory
Exam: mandatory

Assessment scale

0-5

Teaching methods

project working
BPL
exam
home excercises
exercises during lectures
lectures

Learning materials

Material which is to be delivered during lectures
Ulrich/Eppinger: Product design and development
machine directive

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

-

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Takes responsibility for his/her own work. Working in time.
Student knows the foundations of systematic product development process, engineering methods and tools. Student recognises the meaning of innovation and generating ideas in developing products.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Takes responsibility and commits to the group activities in addition to his/her own work.
Student is familiar with meaning of product configuration, product concept, industrial design, ergonomic, principals of design methods in machine design and in launching competitive products to markets. Student applies main ideas of how to protect design rights. Student knows the requirements of machine directives concern entire product life cycle.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Can cooperate responsibly, flexibly and constructively. Develops his/her own and the group’s interaction.
Student is able to work in product development projects and can create project plans in planning phase of development project. Student knows the requirements of machine directives concern entire product life cycle and understand how to define aspects which determine that the products and structures that are safe and easy to use

Enrolment period

02.12.2021 - 10.01.2022

Timing

10.01.2022 - 29.04.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Matti Peltola
Person in charge

Matti Peltola

Groups
  • 20I112B

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Assessment methods and criteria

Lectures
Eexcecises: 2 pcs, mandatory
Exam: mandatory

Assessment scale

0-5

Teaching methods

project working
BPL
exam
home excercises
exercises during lectures
lectures

Learning materials

Material which is to be delivered during lectures
Ulrich/Eppinger: Product design and development
machine directive

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

-

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Takes responsibility for his/her own work. Working in time.
Student knows the foundations of systematic product development process, engineering methods and tools. Student recognises the meaning of innovation and generating ideas in developing products.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Takes responsibility and commits to the group activities in addition to his/her own work.
Student is familiar with meaning of product configuration, product concept, industrial design, ergonomic, principals of design methods in machine design and in launching competitive products to markets. Student applies main ideas of how to protect design rights. Student knows the requirements of machine directives concern entire product life cycle.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Can cooperate responsibly, flexibly and constructively. Develops his/her own and the group’s interaction.
Student is able to work in product development projects and can create project plans in planning phase of development project. Student knows the requirements of machine directives concern entire product life cycle and understand how to define aspects which determine that the products and structures that are safe and easy to use

Enrolment period

02.12.2021 - 10.01.2022

Timing

10.01.2022 - 29.04.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Matti Peltola
Person in charge

Matti Peltola

Groups
  • 20I112C
  • 19I131

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Assessment methods and criteria

Lectures
Eexcecises: 2 pcs, mandatory
Exam: mandatory

Assessment scale

0-5

Teaching methods

project working
BPL
exam
home excercises
exercises during lectures
lectures

Learning materials

Material which is to be delivered during lectures
Ulrich/Eppinger: Product design and development
machine directive

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

-

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Takes responsibility for his/her own work. Working in time.
Student knows the foundations of systematic product development process, engineering methods and tools. Student recognises the meaning of innovation and generating ideas in developing products.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Takes responsibility and commits to the group activities in addition to his/her own work.
Student is familiar with meaning of product configuration, product concept, industrial design, ergonomic, principals of design methods in machine design and in launching competitive products to markets. Student applies main ideas of how to protect design rights. Student knows the requirements of machine directives concern entire product life cycle.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Can cooperate responsibly, flexibly and constructively. Develops his/her own and the group’s interaction.
Student is able to work in product development projects and can create project plans in planning phase of development project. Student knows the requirements of machine directives concern entire product life cycle and understand how to define aspects which determine that the products and structures that are safe and easy to use

Enrolment period

02.12.2021 - 11.01.2022

Timing

01.01.2022 - 31.07.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mika Nikander
Person in charge

Mika Nikander

Groups
  • 21AI112

Objectives (course unit)

The student knows the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. The student understands the principles of sustainable development in product design and company operations. Understands the basics and significance of conception, configuration, product structure, industrial design, ergonomics and design methods in product development. Can plan and supervise a product development project. Knows the possibilities of protecting the results of product development work. Understands the requirements of the Machinery Directive for design work and is able to design safe and user-friendly equipment and structures.

Content (course unit)

Technical creativity and product ideas. Product development process: Product development from idea to finished product and its marketing. Systematic product development. Structural design. Conceptualization. Testing. Prototyping (including Rapid prototyping) and testing. Product development project control and supervision. Protecting the results of product development work. Industrial design. Ergonomics. Quality of product development work. DFM, DFA, DFX.

Assessment criteria, satisfactory (1-2) (course unit)

The student identifies the methods, working methods and tools of systematic product development and understands the importance of creativity and ideation in product development. Takes responsibility for their own performance.

Assessment criteria, good (3-4) (course unit)

The student knows the main operating models and processes of product development and is able to use them independently. The student recognizes the requirements of the Machinery Directive for design work. Takes responsibility and commits not only to his own activities but also to the activities of the group.

Assessment criteria, excellent (5) (course unit)

The student has a good command of all aspects of the product development process and is able to apply their skills in various product development tasks when developing safe and user-friendly equipment and structures. The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and with commitment, taking into account the requirements and needs of the community and its own industry.

Location and time

January 2022/week 2

Exam schedules

The exam on the week 16/2022.

New trials will be possible in May and June. Dates will be announced later.

Assessment scale

0-5

Teaching methods

project working
BPL
exam
home excercises
exercises during lectures
lectures

Learning materials

Material for this implementation will be available in the Teams Class Notebook and Moodle. Teams is the master location.

Student workload

Lectures 12 pcs

Practical works

MBD is a personal work

Machine directive is a team work which includes also the presentation of the findings by all team members

Content scheduling

Week program is to be informed in the beginning of course

Completion alternatives

NA

Practical training and working life cooperation

Visitor lecturers

There will be two practical works:
MBD (Model Based Definition)
Machine Directive

Further information

Feedback on the implementation of the course is collected through the Course Feedback System.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

Examination
30% weight

MBD training work
30% weight

Machine Directive exercise work
30% weight

Group work
10% weight

Rating 0-5

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

The student identifies the methods, working methods and tools of systematic product development as well as
understands the importance of creativity and ideation in product development. Take responsibility for own performance.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

The student knows the main operating models and processes of product development and is able to act independently
to use them. The student recognizes the requirements of the Machinery Directive for design work. Take responsibility and commits not only to own activities but also to the activities of the group.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

The student has a good command of all aspects of the product development process and is able to apply own skills
in various product development tasks in the development of safe and user-friendly equipment and structures.
The student is able to take into account the requirements of the Machinery Directive for design work. Acts responsibly and taking into account the requirements and needs of the Community and own professional sector.