Skip to main content

Statics (5 cr)

Code: 5K00DM64-3007

General information


Enrolment period
02.12.2020 - 15.01.2021
Registration for the implementation has ended.
Timing
11.01.2021 - 30.04.2021
Implementation has ended.
Credits
5 cr
Mode of delivery
Contact learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
Finnish
Degree programmes
Degree Programme in Mechanical Engineering
Teachers
Matti Peltola
Person in charge
Matti Peltola
Course
5K00DM64

Objectives (course unit)

Students are familiar with the basic concepts of statics. The student is able to solve the equilibrium equations and supporting forces of a rigid piece and simple body systems. The student is able to solve the support forces and loadings of simple statically determined structures and is able to draw a stress pattern.

Content (course unit)

The most important principles and laws of statics. Combining forces. Distribution of forces into components. Balance conditions for particle, rigid body and body system. Solving beam structure, loads and distributed forces.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes the basic concepts and quantities of statics. The student is aware of the laws governing static space and performs the given calculations, if necessary assisted.

Assessment criteria, good (3-4) (course unit)

Students are familiar with the laws that govern behavior and perform independently from assigned tasks. The student is able to determine the strengths of the structure and calculate the stresses of the structure independently in simple cases.

Assessment criteria, excellent (5) (course unit)

The student is well versed in all aspects of statics and is able to apply his / her skills in solving various structural load situations and calculating forces and stresses.

Location and time

Aloitus viikolla 2/2021 etänä.

Exam schedules

Totetuksen aikainen tentti huhtikuussa 2021.
Uusintatentit: Touko- ja kesäkuussa 2021.
Tenttien tarkemmat ajankohdat selviävät toteutuksen aikana.

Assessment methods and criteria

Kurssin arvosanan saamiseksi on opiskelijan suoritettava vähintään 40% (= 20 kpl) harjoitustehtävistä ja osallistuttava lopputenttiin. Toteutuksen arvosana koostuu lopputentin arvosanasta, johon voi saada korkeintaan yhden yksikön korotuksen hyvin suoritetuista harjoitustehtävistä.
Opiskelija saa opintojaksosta ilman tenttiä arvosanan 1, mikäli hän laskee harjoitustehtävistä vähintään 75% (=38 kpl). Tätä arvosanaa voi luonnollisesti korottaa tentissä.

Assessment scale

0-5

Teaching methods

Luentovideot, harjoitukset, tentti.

Learning materials

Luento- ja harjoitustehtävävideot
Oppikirjat: Salmi: Statiikka, Pressus Oy, 2005.
Outinen: Statiikka osa I (1998) ja osa II (2003), Pressus Oy.
Beer & Johnston: Mechanics for Engineers, Statics, McGraw-Hill Book Company

Student workload

Kokonaistuntimäärä on 135 h, joka jakautuu itsenäiseen opiskeluun videoiden ja harjoitustehtävien avulla.
Harjoitukset ovat yhteensä 15h ja itsenäisen työn osuus on 120h.

Completion alternatives

Ei ole.

Further information

Opettaja: Matti Peltola
Huone F1-08.
050-432 22 54.
matti.peltola@tamk.fi.

Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)

Tentin yhteispisteet jäävät alle 8p ja harjoitustehtävistä on tehty alle 75%.

Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)

Opiskelija tunnistaa statiikan tärkeimmät peruskäsitteet ja suureet. Opiskelija tiedostaa staattista tilaa hallitsevat lait ja suoriutuu annetuista laskutehtävistä, tarvittaessa avustettuna.

Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)

Opiskelija tuntee käyttäytymistä hallitsevat lait ja suoriutuu itsenäisesti annetuista tehtävistä. Opiskelija kykenee selvittämään rakenteen tukivoimat ja laskemaan rakenteen rasitukset.

Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)

Opiskelija hallitsee hyvin kaikki statiikan osa-alueet ja pystyy soveltamaan taitoaan erilaisten rakenteiden kuormitustilanteiden selvittämisessä sekä voimien ja rasitusten laskennassa.

Go back to top of page