Building ConstructionsLaajuus (5 cr)
Code: 5T00EH88
Credits
5 op
Objectives
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Enrolment period
02.07.2024 - 31.08.2024
Timing
02.09.2024 - 20.12.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Heikki Saarenpää
Groups
-
23I253
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.12.2023 - 13.01.2024
Timing
08.01.2024 - 03.05.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Heikki Saarenpää
Groups
-
22I254
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.12.2023 - 22.01.2024
Timing
01.01.2024 - 01.06.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Heikki Saarenpää
Groups
-
23AI253
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.08.2023 - 28.08.2023
Timing
28.08.2023 - 15.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Heikki Saarenpää
Groups
-
22I253
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.12.2022 - 17.01.2023
Timing
09.01.2023 - 28.04.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Heikki Saarenpää
Groups
-
21I253
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.12.2022 - 17.01.2023
Timing
09.01.2023 - 28.04.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Aki Kortetmäki
Groups
-
21I254
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.08.2022 - 09.09.2022
Timing
29.08.2022 - 16.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, Electrical Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Timo Lähteenmäki
Groups
-
20I254
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
10.01.2022 - 29.04.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Heikki Saarenpää
Groups
-
20I253
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
01.01.2022 - 31.05.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Heikki Saarenpää
- Tero Markkanen
Person in charge
Timo Lähteenmäki
Groups
-
20AI254
Objectives (course unit)
The student is able to
- identify typical past and present building constructions and their constraints for building services engineering
- interpret structural documents
- describe the process planning and realising of a building project and the interoperations of designers and contractors
- pass on information at the right time
- play an appropriate part in the production planning process of a building site for a house
- analyse the general practices and key occupational safety features at a building site
Content (course unit)
Basics of construction technology, structures, structural elements, materials, fixtures, external structures.
Construction planning and documentation. The significance of structures for energy efficiency. Structures and moisture. Phases of a building project, the stakeholders and their mutual tasks. Types of contracts, inspection and scheduling techniques. Meeting and cooperation procedures during the planning and realisation. Occupational safety on a building site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the most common constructions, but is able to describe the connection of building technology to them in a narrow way. He names the parties to the building project, but their roles and site organizations are incomplete.
The student is familiar with the written materials of the course. In addition to the material distributed during the course, the student will produce assignments using the information available in literature and online material, and use the terminology of the field appropriately. The exercise assignments have been reset as instructed.
Assessment criteria, good (3-4) (course unit)
613/5000
The student recognizes the most common constructions and their alignment with building technology. He gives a broad description of the parties involved in the building project, their tasks and the site organizations.
The student is able to describe the importance of planning and land use in building services solutions and the required permit procedures.
The student is familiar with the written materials of the course. The student will produce the assignments using the material available in the course in addition to the material distributed in the course and will use the terminology of the field well. The exercise assignments have been reset as instructed.
Assessment criteria, excellent (5) (course unit)
In addition to the above, the student compares different implementations of construction project and site design from the perspective of building technology. He outlines different options for combining structures and building technology.
Assessment scale
0-5