Skip to main content

NC-technologyLaajuus (3 cr)

Code: 5K00DK73

Credits

3 op

Objectives

The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.

Content

Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms

Assessment criteria, satisfactory (1-2)

Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.

Assessment criteria, good (3-4)

The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.

Assessment criteria, excellent (5)

The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.

Enrolment period

01.04.2024 - 17.01.2025

Timing

07.01.2025 - 30.05.2025

Credits

3 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Konetekniikka Virtuaalihenkilö
Person in charge

Joni Nieminen

Groups
  • 22I160

Objectives (course unit)

The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.

Content (course unit)

Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms

Assessment criteria, satisfactory (1-2) (course unit)

Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.

Assessment criteria, good (3-4) (course unit)

The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.

Assessment criteria, excellent (5) (course unit)

The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.

Assessment scale

0-5

Enrolment period

02.07.2023 - 04.09.2023

Timing

01.08.2023 - 31.12.2023

Credits

3 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Tomi-Pekka Nieminen
  • Joni Nieminen
Person in charge

Joni Nieminen

Groups
  • 21I160

Objectives (course unit)

The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.

Content (course unit)

Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms

Assessment criteria, satisfactory (1-2) (course unit)

Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.

Assessment criteria, good (3-4) (course unit)

The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.

Assessment criteria, excellent (5) (course unit)

The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.

Assessment scale

0-5

Enrolment period

01.05.2022 - 04.09.2022

Timing

29.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Tomi-Pekka Nieminen
  • Joni Nieminen
Person in charge

Joni Nieminen

Small groups
  • Ryhmä 1 (Size: 22. Open UAS: 0.)
  • Ryhmä 2 (Size: 22. Open UAS: 0.)
Groups
  • 20I160
Small groups
  • Ryhmä 1
  • Ryhmä 2

Objectives (course unit)

The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.

Content (course unit)

Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms

Assessment criteria, satisfactory (1-2) (course unit)

Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.

Assessment criteria, good (3-4) (course unit)

The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.

Assessment criteria, excellent (5) (course unit)

The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.

Assessment scale

0-5

Enrolment period

01.05.2022 - 04.09.2022

Timing

01.08.2022 - 31.12.2022

Credits

3 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Tomi-Pekka Nieminen
  • Joni Nieminen
Person in charge

Markus Aho

Small groups
  • Ryhmä 1 (Size: 0. Open UAS: 0.)
  • Ryhmä 2 (Size: 0. Open UAS: 0.)
Groups
  • 21AI112
Small groups
  • Group 1
  • Group 2

Objectives (course unit)

The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.

Content (course unit)

Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms

Assessment criteria, satisfactory (1-2) (course unit)

Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.

Assessment criteria, good (3-4) (course unit)

The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.

Assessment criteria, excellent (5) (course unit)

The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.

Assessment scale

0-5