Practical Training 3Laajuus (12 cr)
Code: 5K00DL37
Credits
12 op
Objectives
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2)
.
Assessment criteria, good (3-4)
.
Assessment criteria, excellent (5)
.
Assessment criteria, pass/fail
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Enrolment period
02.07.2024 - 11.08.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anja Salo
Person in charge
Jere Siivonen
Groups
-
22AI112P
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2024 - 11.08.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Harri Saarinen
Person in charge
Harri Laaksonen
Groups
-
21I111
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
13.05.2024 - 11.08.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Pauliina Paukkala
Person in charge
Lasse Hillman
Groups
-
21I160
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2024 - 11.08.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mika Nikander
Person in charge
Erkki Kiviniemi
Groups
-
21I180
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2024 - 11.08.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Ville Jouppila
Person in charge
Ville Jouppila
Groups
-
21I190
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2024 - 11.08.2024
Timing
01.08.2024 - 31.12.2024
Credits
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mikko Ukonaho
Person in charge
Mikko Ukonaho
Groups
-
21I228K
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
07.06.2023 - 31.12.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Harri Laaksonen
Person in charge
Harri Laaksonen
Groups
-
20I111
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 30.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Lasse Hillman
Person in charge
Lasse Hillman
Groups
-
20I160
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Antti Perttula
Person in charge
Antti Perttula
Groups
-
20I180
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Ville Jouppila
Person in charge
Ville Jouppila
Groups
-
20I190
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
Virtual portion
6 op
RDI portion
12 op
Mode of delivery
50 % Contact teaching, 50 % Distance learning
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Mikko Ukonaho
Person in charge
Mika Ijas
Groups
-
20I228K
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
01.02.2023 - 02.02.2023
Timing
01.08.2023 - 31.12.2023
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Erkki Kiviniemi
Person in charge
Erkki Kiviniemi
Groups
-
21AI112
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
Pass/Fail
Enrolment period
01.01.2022 - 31.12.2022
Timing
29.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Erkki Kiviniemi
Person in charge
Erkki Kiviniemi
Groups
-
20AI112
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
Pass/Fail
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Harri Laaksonen
Person in charge
Harri Laaksonen
Groups
-
19I111
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Lasse Hillman
Person in charge
Lasse Hillman
Groups
-
19I160
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Antti Perttula
Person in charge
Antti Perttula
Groups
-
19I180
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Ville Jouppila
Person in charge
Ville Jouppila
Groups
-
19I190
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5
Enrolment period
02.07.2022 - 11.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
12 op
RDI portion
12 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Petri Pohjola
Person in charge
Mika Ijas
Groups
-
19I228K
Objectives (course unit)
The aim is to combine theory and practice and provide a reality-based insight into the requirements and practices in the field.The student can utilize his/her professional knowledge and skills when working as a practicant in industry.
Content (course unit)
8 weeks professional industrial training in a work supporting the study path.
The student works as a trainee in the field, taking a learning diary and reporting on his / her training. Traineeship is reported in writing after a training session. Students become familiar with organizational structure, management procedures, industry regulations and operational processes.
Prerequisites (course unit)
Traineeship plan and traineeship agreement approved before the traineeship.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
As the progress of the studies progresses, the content of the third part of the internship should approach the future engineering assignments of the study area where the student applies the things he has learned at the polytechnic. In addition to his / her own job, the trainee will familiarize himself / herself with the activities of the company or work community so that he / she can demonstrate this in his / her training report. Approved work (8 weeks = 8*40 h = 320 h) at the traineeship and completion and return of the trainee diary and traineeship report.
Assessment scale
0-5