Basics of Electrical Installations and SafetyLaajuus (5 cr)
Code: 5S00EV65
Credits
5 op
Objectives
The student can
- carry out electrical installations of a smaller site, including an electrical plan
- Principles of sizing and selection of electrical equipment
- perform and document safety checks on the device / site
- the essentials of electrical safety
- identify and apply electrical safety requirements in electrical work
- define the responsibilities and obligations associated with the duties of a person responsible for electrical safety
Content
Key legislation related to electrical safety and electrical work safety. (STL, VnAs and SFS6002)
Electricity center construction project based on design documentation. Center commissioning inspection.
The basic structure of the building's electrical network and the basics of electrical installation technology: determination of power, sizing of the cable and selection of electrical equipment. Documentation included in the electrical plan of the property.
Prerequisites
Content Management of Basic Electrical and Automation Engineering Knowledge
Enrolment period
02.12.2024 - 15.01.2025
Timing
01.01.2025 - 31.07.2025
Credits
5 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Markus Miller
Person in charge
Jarkko Lehtonen
Groups
-
24AI231
Objectives (course unit)
The student can
- carry out electrical installations of a smaller site, including an electrical plan
- Principles of sizing and selection of electrical equipment
- perform and document safety checks on the device / site
- the essentials of electrical safety
- identify and apply electrical safety requirements in electrical work
- define the responsibilities and obligations associated with the duties of a person responsible for electrical safety
Content (course unit)
Key legislation related to electrical safety and electrical work safety. (STL, VnAs and SFS6002)
Electricity center construction project based on design documentation. Center commissioning inspection.
The basic structure of the building's electrical network and the basics of electrical installation technology: determination of power, sizing of the cable and selection of electrical equipment. Documentation included in the electrical plan of the property.
Prerequisites (course unit)
Content Management of Basic Electrical and Automation Engineering Knowledge
Assessment scale
0-5
Enrolment period
02.12.2023 - 31.12.2023
Timing
08.01.2024 - 05.05.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Martti Honkiniemi
Person in charge
Jarkko Lehtonen
Groups
-
23I231A
Objectives (course unit)
The student can
- carry out electrical installations of a smaller site, including an electrical plan
- Principles of sizing and selection of electrical equipment
- perform and document safety checks on the device / site
- the essentials of electrical safety
- identify and apply electrical safety requirements in electrical work
- define the responsibilities and obligations associated with the duties of a person responsible for electrical safety
Content (course unit)
Key legislation related to electrical safety and electrical work safety. (STL, VnAs and SFS6002)
Electricity center construction project based on design documentation. Center commissioning inspection.
The basic structure of the building's electrical network and the basics of electrical installation technology: determination of power, sizing of the cable and selection of electrical equipment. Documentation included in the electrical plan of the property.
Prerequisites (course unit)
Content Management of Basic Electrical and Automation Engineering Knowledge
Assessment scale
0-5
Enrolment period
02.07.2023 - 03.09.2023
Timing
14.08.2023 - 16.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Martti Honkiniemi
- Martti Honkiniemi
Person in charge
Jarkko Lehtonen
Groups
-
22AI231
Objectives (course unit)
The student can
- carry out electrical installations of a smaller site, including an electrical plan
- Principles of sizing and selection of electrical equipment
- perform and document safety checks on the device / site
- the essentials of electrical safety
- identify and apply electrical safety requirements in electrical work
- define the responsibilities and obligations associated with the duties of a person responsible for electrical safety
Content (course unit)
Key legislation related to electrical safety and electrical work safety. (STL, VnAs and SFS6002)
Electricity center construction project based on design documentation. Center commissioning inspection.
The basic structure of the building's electrical network and the basics of electrical installation technology: determination of power, sizing of the cable and selection of electrical equipment. Documentation included in the electrical plan of the property.
Prerequisites (course unit)
Content Management of Basic Electrical and Automation Engineering Knowledge
Assessment scale
0-5
Enrolment period
02.12.2022 - 31.12.2022
Timing
01.01.2023 - 31.07.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Martti Honkiniemi
Person in charge
Jarkko Lehtonen
Groups
-
22I231A
Objectives (course unit)
The student can
- carry out electrical installations of a smaller site, including an electrical plan
- Principles of sizing and selection of electrical equipment
- perform and document safety checks on the device / site
- the essentials of electrical safety
- identify and apply electrical safety requirements in electrical work
- define the responsibilities and obligations associated with the duties of a person responsible for electrical safety
Content (course unit)
Key legislation related to electrical safety and electrical work safety. (STL, VnAs and SFS6002)
Electricity center construction project based on design documentation. Center commissioning inspection.
The basic structure of the building's electrical network and the basics of electrical installation technology: determination of power, sizing of the cable and selection of electrical equipment. Documentation included in the electrical plan of the property.
Prerequisites (course unit)
Content Management of Basic Electrical and Automation Engineering Knowledge
Assessment scale
0-5