Electric Circuit AnalysisLaajuus (3 cr)
Code: 5S00DX74
Credits
3 op
Objectives
The student knows
- when Fourier series development is needed in circuit modeling
The student can
- Model symmetric three-phase systems using pointer calculation
- use Fourier analysis to analyze circuits where the source voltages and currents are any periodic function
Content
Structure and connections of the symmetric three-phase system, different load situations and the effect of the neutral conductor on the system operation, the power of the three-phase system, single-phase substitution.
Failure situations of symmetric three-phase system and analysis of their continuity state by means of pointer calculation.
Fourier series development in the representation of periodic functions, frequency response and its role in system modeling, calculation of system output by Fourier series and frequency response.
Prerequisites
Controlling the contents of the DC and AC Modules and Modeling Circuits.
Enrolment period
02.12.2023 - 31.12.2023
Timing
08.01.2024 - 05.05.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Sami Heikkilä
Person in charge
Jarkko Lehtonen
Groups
-
23I231A
Objectives (course unit)
The student knows
- when Fourier series development is needed in circuit modeling
The student can
- Model symmetric three-phase systems using pointer calculation
- use Fourier analysis to analyze circuits where the source voltages and currents are any periodic function
Content (course unit)
Structure and connections of the symmetric three-phase system, different load situations and the effect of the neutral conductor on the system operation, the power of the three-phase system, single-phase substitution.
Failure situations of symmetric three-phase system and analysis of their continuity state by means of pointer calculation.
Fourier series development in the representation of periodic functions, frequency response and its role in system modeling, calculation of system output by Fourier series and frequency response.
Prerequisites (course unit)
Controlling the contents of the DC and AC Modules and Modeling Circuits.
Assessment scale
0-5
Enrolment period
02.12.2023 - 30.01.2024
Timing
08.01.2024 - 26.05.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Lauri Hietalahti
Person in charge
Jarkko Lehtonen
Groups
-
22AI231
Objectives (course unit)
The student knows
- when Fourier series development is needed in circuit modeling
The student can
- Model symmetric three-phase systems using pointer calculation
- use Fourier analysis to analyze circuits where the source voltages and currents are any periodic function
Content (course unit)
Structure and connections of the symmetric three-phase system, different load situations and the effect of the neutral conductor on the system operation, the power of the three-phase system, single-phase substitution.
Failure situations of symmetric three-phase system and analysis of their continuity state by means of pointer calculation.
Fourier series development in the representation of periodic functions, frequency response and its role in system modeling, calculation of system output by Fourier series and frequency response.
Prerequisites (course unit)
Controlling the contents of the DC and AC Modules and Modeling Circuits.
Assessment scale
0-5
Enrolment period
02.12.2022 - 31.12.2022
Timing
01.01.2023 - 13.06.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Aki Korpela
Person in charge
Jarkko Lehtonen
Groups
-
22I231A
Objectives (course unit)
The student knows
- when Fourier series development is needed in circuit modeling
The student can
- Model symmetric three-phase systems using pointer calculation
- use Fourier analysis to analyze circuits where the source voltages and currents are any periodic function
Content (course unit)
Structure and connections of the symmetric three-phase system, different load situations and the effect of the neutral conductor on the system operation, the power of the three-phase system, single-phase substitution.
Failure situations of symmetric three-phase system and analysis of their continuity state by means of pointer calculation.
Fourier series development in the representation of periodic functions, frequency response and its role in system modeling, calculation of system output by Fourier series and frequency response.
Prerequisites (course unit)
Controlling the contents of the DC and AC Modules and Modeling Circuits.
Assessment scale
0-5
Enrolment period
02.12.2021 - 31.12.2021
Timing
01.01.2022 - 15.05.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Aki Korpela
Person in charge
Jarkko Lehtonen
Groups
-
21I231A
Objectives (course unit)
The student knows
- when Fourier series development is needed in circuit modeling
The student can
- Model symmetric three-phase systems using pointer calculation
- use Fourier analysis to analyze circuits where the source voltages and currents are any periodic function
Content (course unit)
Structure and connections of the symmetric three-phase system, different load situations and the effect of the neutral conductor on the system operation, the power of the three-phase system, single-phase substitution.
Failure situations of symmetric three-phase system and analysis of their continuity state by means of pointer calculation.
Fourier series development in the representation of periodic functions, frequency response and its role in system modeling, calculation of system output by Fourier series and frequency response.
Prerequisites (course unit)
Controlling the contents of the DC and AC Modules and Modeling Circuits.
Assessment scale
0-5