Skip to main content

Basics of Machine ComponentsLaajuus (5 cr)

Code: 5K00DU91

Credits

5 op

Objectives

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Enrolment period

02.07.2024 - 08.09.2024

Timing

02.09.2024 - 08.12.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mikko Ukonaho
Person in charge

Mikko Ukonaho

Groups
  • 23AI112

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2023 - 14.01.2024

Timing

08.01.2024 - 15.04.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Seats

0 - 40

Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Ari-Jaakko Notko
Person in charge

Mikko Ukonaho

Groups
  • 22I112C

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2023 - 14.01.2024

Timing

08.01.2024 - 15.04.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Ari-Jaakko Notko
Person in charge

Mikko Ukonaho

Groups
  • 22I112A

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2023 - 14.01.2024

Timing

08.01.2024 - 15.04.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Ari-Jaakko Notko
Person in charge

Mikko Ukonaho

Groups
  • 22I112B

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2023 - 14.01.2024

Timing

08.01.2024 - 30.04.2024

Credits

5 op

Mode of delivery

Contact teaching

Unit

Vehicle Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Aki Martikainen
Person in charge

Aki Martikainen

Groups
  • 22I131
  • 22I228A

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.07.2023 - 10.09.2023

Timing

08.09.2023 - 16.12.2023

Credits

5 op

Virtual portion

2 op

Mode of delivery

60 % Contact teaching, 40 % Online learning

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Aki Martikainen
Person in charge

Ari-Jaakko Notko

Groups
  • 22AI112P

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2022 - 15.01.2023

Timing

09.01.2023 - 01.05.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Vehicle Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Aki Martikainen
Groups
  • 21I131
  • 21I228A

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 09.06.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mikko Ukonaho
Person in charge

Mikko Ukonaho

Groups
  • 21I112A

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 09.06.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mikko Ukonaho
Person in charge

Mikko Ukonaho

Groups
  • 21I112B

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2022 - 11.01.2023

Timing

01.01.2023 - 09.06.2023

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mikko Ukonaho
Person in charge

Mikko Ukonaho

Groups
  • 21I112C

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.07.2022 - 25.08.2022

Timing

01.08.2022 - 12.12.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Ari-Jaakko Notko
Person in charge

Ari-Jaakko Notko

Groups
  • 21AI112

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2021 - 25.01.2022

Timing

10.01.2022 - 29.04.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mikko Ukonaho
Person in charge

Mikko Ukonaho

Groups
  • 20I112A

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2021 - 25.01.2022

Timing

10.01.2022 - 29.04.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mikko Ukonaho
Person in charge

Mikko Ukonaho

Groups
  • 20I112B

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5

Enrolment period

02.12.2021 - 25.01.2022

Timing

10.01.2022 - 29.04.2022

Credits

5 op

Mode of delivery

Contact teaching

Unit

Mechanical Engineering

Campus

TAMK Main Campus

Teaching languages
  • Finnish
Degree programmes
  • Degree Programme in Mechanical Engineering
Teachers
  • Mikko Ukonaho
Person in charge

Mikko Ukonaho

Groups
  • 20I112C
  • 20I131
  • 20I228A

Objectives (course unit)

Student knows and is able to dimension the most important machine elements and power transmissions such as bearings and gears. Student is able to dimension some most important joints such as screws and keys. Student understands the effects of proper mechanical design of machine elements to performance of the machine and can apply appropriate standards and procedures.

Content (course unit)

The most typical machine elements in machine design; bearings and gears.
The most typical joints in machine design; Axle-hub joints, screws and welds.
The most typical transmissions in machine design; gear. Rolling bearings. Friction, wear and lubrication.

Assessment criteria, satisfactory (1-2) (course unit)

The student recognizes some of the most important machine parts and joints in machine building, such as bearings and wedge joint as well as being able to dimension them as simple targets. The student is aware of the impact of design on machine characteristics and the importance of standards in measuring dimensions. The student is only somewhat motivated, takes responsibility for his / her own performance, knows how to act in the group and gives and receives feedback.

Assessment criteria, good (3-4) (course unit)

Students are familiar with some of the most important machine parts and joints in machine building, such as bearings and wedge joint, and are able to independently dimension them to conventional objects. The student understands and is able to describe the impact of design on the machine's properties and takes the correct standards into consideration in the selection. Students are clearly motivated, take responsibility for their own and team performance and are able to constructively give and receive feedback.

Assessment criteria, excellent (5) (course unit)

The student knows and understands widely some of the most important machine parts and joints in machine building, such as bearings and wedge joint and can suitably dimension them for demanding applications. The student can reasonably describe the impact of different solution options and design on the machine's properties and apply the correct standards in the selection measure. Students are highly motivated, committed to taking responsibility for their own and group performance, and are able to systematically use feedback as a tool for professional growth.

Assessment scale

0-5