NC-technologyLaajuus (3 cr)
Code: 5K00DK73
Credits
3 op
Objectives
The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.
Content
Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms
Assessment criteria, satisfactory (1-2)
Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.
Assessment criteria, good (3-4)
The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.
Assessment criteria, excellent (5)
The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.
Enrolment period
01.04.2024 - 17.01.2025
Timing
07.01.2025 - 30.05.2025
Credits
3 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jere Siivonen
- Joni Nieminen
Person in charge
Jere Siivonen
Groups
-
22I160
Objectives (course unit)
The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.
Content (course unit)
Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms
Assessment criteria, satisfactory (1-2) (course unit)
Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.
Assessment criteria, good (3-4) (course unit)
The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.
Assessment criteria, excellent (5) (course unit)
The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.
Assessment scale
0-5
Enrolment period
18.11.2024 - 05.01.2025
Timing
01.01.2025 - 31.05.2025
Credits
3 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Konetekniikka Virtuaalihenkilö
- Tomi-Pekka Nieminen
- Joni Nieminen
Person in charge
Joni Nieminen
Groups
-
23AI112
Objectives (course unit)
The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.
Content (course unit)
Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms
Assessment criteria, satisfactory (1-2) (course unit)
Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.
Assessment criteria, good (3-4) (course unit)
The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.
Assessment criteria, excellent (5) (course unit)
The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.
Assessment scale
0-5
Enrolment period
02.07.2023 - 04.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Joni Nieminen
Person in charge
Joni Nieminen
Groups
-
21I160
Objectives (course unit)
The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.
Content (course unit)
Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms
Assessment criteria, satisfactory (1-2) (course unit)
Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.
Assessment criteria, good (3-4) (course unit)
The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.
Assessment criteria, excellent (5) (course unit)
The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.
Assessment scale
0-5
Enrolment period
01.05.2022 - 04.09.2022
Timing
29.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Joni Nieminen
Person in charge
Joni Nieminen
Small groups
- Ryhmä 1 (Size: 22. Open UAS: 0.)
- Ryhmä 2 (Size: 22. Open UAS: 0.)
Groups
-
20I160
Small groups
- Ryhmä 1
- Ryhmä 2
Objectives (course unit)
The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.
Content (course unit)
Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms
Assessment criteria, satisfactory (1-2) (course unit)
Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.
Assessment criteria, good (3-4) (course unit)
The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.
Assessment criteria, excellent (5) (course unit)
The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.
Assessment scale
0-5
Enrolment period
01.05.2022 - 04.09.2022
Timing
01.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Joni Nieminen
Person in charge
Markus Aho
Small groups
- Ryhmä 1 (Size: 0. Open UAS: 0.)
- Ryhmä 2 (Size: 0. Open UAS: 0.)
Groups
-
21AI112
Small groups
- Group 1
- Group 2
Objectives (course unit)
The student knows the grounds of the ISO code and the structure of the NC program. The student can produce a ISO code language program for to the milling/turning CNC machines and can understand its most general challenges and mistakes. The student can choose a blade from the tool library from the point of view of the making of the part form, correct. The student commands the utilising of job circulations and subprograms in the programming. The student is able to follow the editymistä of the making from the program mistakes and is able to locate the programming from the program.
Content (course unit)
Structure of the ISO code language and basic codes. Most general programming mistakes and locating and repair of them. Choice of the tool according to part form. Job circulations and subprograms
Assessment criteria, satisfactory (1-2) (course unit)
Students are able to produce flawless NC programs with little guidance.
Understand the basics of finding a program fault.
Capable of operating with a CNC machine.
Assessment criteria, good (3-4) (course unit)
The student is able to produce the most common NC programs correctly.
Can find and fix common programming errors in NC program.
Capable of operating on a CNC controlled machine.
Assessment criteria, excellent (5) (course unit)
The student is able to make even the most demanding NC programs flawlessly
Can find and correct programming errors in NC program.
Capable of operating on a CNC machine under supervision.
Assessment scale
0-5