Trump Cards of Working LifeLaajuus (2 cr)
Code: 5K00DJ95
Credits
2 op
Objectives
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Assessment criteria, satisfactory (1-2)
.
Assessment criteria, good (3-4)
.
Assessment criteria, excellent (5)
.
Assessment criteria, pass/fail
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Further information
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Enrolment period
02.12.2023 - 11.01.2024
Timing
08.01.2024 - 31.07.2024
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Joni Nieminen
Groups
-
24AI112
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
0-5
Enrolment period
02.07.2023 - 08.09.2023
Timing
11.09.2023 - 15.10.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
23I112A
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
02.07.2023 - 08.09.2023
Timing
11.09.2023 - 15.10.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
23I112B
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
02.07.2023 - 08.09.2023
Timing
11.09.2023 - 15.10.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
23I112C
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
02.12.2022 - 11.01.2023
Timing
01.01.2023 - 14.05.2023
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
23AI112
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
02.07.2022 - 15.09.2022
Timing
15.09.2022 - 31.12.2022
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
22I112C
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
02.07.2022 - 15.09.2022
Timing
01.09.2022 - 31.12.2022
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
22I112A
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
02.07.2022 - 15.09.2022
Timing
01.09.2022 - 31.12.2022
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
22I112B
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
09.09.2022 - 15.11.2022
Timing
01.09.2022 - 31.12.2022
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 30
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
22I112A
-
22I112B
-
22I112C
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail
Enrolment period
02.12.2021 - 25.02.2022
Timing
31.01.2022 - 15.05.2022
Credits
2 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
22AI112P
Objectives (course unit)
Student knows the principles of how to work safely and additionally, student knows the main points of regulations of industrial safety. He knows how to prepare a temporary place for flamework and how to use first aid extinction equipment.
Content (course unit)
Principles of safe working, regulations of industrial safety, regulations of flameworks, extinction in practice.
Further information (course unit)
The exercise is kept outdoors, so take note of the weather on the day of the card training.
For both card training, full-time attendance is mandatory. Absence cannot be compensated by additional work, etc. The duration of both card training is 8h, so the delay in the training session will lead to rejection.
Assessment criteria, satisfactory (1-2) (course unit)
.
Assessment criteria, good (3-4) (course unit)
.
Assessment criteria, excellent (5) (course unit)
.
Assessment criteria, pass/fail (course unit)
Both card trainings will be assessed on the Qualified / Rejected scale. If you get approved for both card trainings, the full course grade will be Qualified. The completion of both cards requires a full presence on the course.
Assessment scale
Pass/Fail