Laboratories of Material and Production EngineeringLaajuus (4 cr)
Code: 5K00DK35
Credits
4 op
Objectives
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Enrolment period
01.08.2024 - 30.09.2024
Timing
22.10.2024 - 31.12.2024
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Mika Heikkilä
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Juuso Huhtiniemi
Groups
-
23I112A
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
01.08.2024 - 30.09.2024
Timing
22.10.2024 - 31.12.2024
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sakari Lepola
- Jarmo Lehtonen
- Mika Heikkilä
- Juuso Huhtiniemi
Person in charge
Juuso Huhtiniemi
Groups
-
23I112B
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
01.08.2024 - 30.09.2024
Timing
22.10.2024 - 31.12.2024
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Topi Talvitie
- Jarmo Lehtonen
- Mika Heikkilä
- Johanna Hakalahti
- Juuso Huhtiniemi
Person in charge
Juuso Huhtiniemi
Groups
-
23I112C
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
02.12.2023 - 11.01.2024
Timing
01.01.2024 - 31.07.2024
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
23AI112
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
02.07.2023 - 17.09.2023
Timing
02.10.2023 - 30.04.2024
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Konetekniikka Virtuaalihenkilö
- Tomi-Pekka Nieminen
- Johanna Hakalahti
- Sakari Lepola
- Jarmo Lehtonen
- Mika Heikkilä
- Juuso Huhtiniemi
Person in charge
Tomi-Pekka Nieminen
Groups
-
22I112A
-
22I112B
-
22I112C
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
02.07.2023 - 17.09.2023
Timing
02.10.2023 - 31.12.2023
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Johanna Hakalahti
- Sakari Lepola
- Mika Heikkilä
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Tomi-Pekka Nieminen
Groups
-
22I112B
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
02.07.2023 - 17.09.2023
Timing
02.10.2023 - 31.12.2023
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Tomi-Pekka Nieminen
Groups
-
22I112C
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
02.12.2022 - 26.02.2023
Timing
06.03.2023 - 04.06.2023
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Sakari Lepola
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
22AI112P
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
01.05.2022 - 31.08.2022
Timing
29.08.2022 - 19.12.2022
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Sakari Lepola
- Mika Heikkilä
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Tomi-Pekka Nieminen
Groups
-
21I112A
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
01.05.2022 - 31.08.2022
Timing
29.08.2022 - 19.12.2022
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Sakari Lepola
- Mika Heikkilä
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Tomi-Pekka Nieminen
Groups
-
21I112B
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
01.05.2022 - 31.08.2022
Timing
29.08.2022 - 19.12.2022
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Tomi-Pekka Nieminen
- Sakari Lepola
- Mika Heikkilä
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Tomi-Pekka Nieminen
Groups
-
21I112C
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5
Enrolment period
29.11.2021 - 09.01.2022
Timing
10.01.2022 - 15.05.2022
Credits
4 op
Mode of delivery
Contact teaching
Unit
Mechanical Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Joni Nieminen
- Sakari Lepola
- Petri Koskinen
- Jarmo Lehtonen
- Juuso Huhtiniemi
Person in charge
Sakari Lepola
Groups
-
21AI112
Objectives (course unit)
Student can test materials with basic methods and is able to manufacture simple pieces by turning, milling and welding.
Content (course unit)
Tensile test of steel, tensile test of plastic, jominy test (hardenability of steel), precipitation hardening of aluminium, studying micro-structure of cast iron, Charpy impact test of steel. MIG/MAG welding, machining.
Assessment criteria, satisfactory (1-2) (course unit)
The student is able to help with the given tasks and report on them. Being able to afford the report and accomplish the final test is inevitable.
Assessment criteria, good (3-4) (course unit)
The student performs the assigned tasks as a supervisor and reports on the core content using the standard format of technical reporting.
Assessment criteria, excellent (5) (course unit)
The student acts independently and actively under supervision and reports on the work he has done on a wide scale and using professional terms. Performance at a good level from the final test.
Assessment scale
0-5