Laboratory Exercises in Embedded SystemsLaajuus (5 cr)
Code: 5G00EV02
Credits
5 op
Objectives
The student is able to use measuring devices, make connections, evaluate the correctness of the results and report on the working methods, equipment and connections studied and the results obtained.
Content
Group work on topics such as digital technology, data transfer, microcontrollers, i / o circuits, sensors, regulators and other electronics, timing of signals, program run times, interference, interference, and signal quality.
Assessment criteria, satisfactory (1-2)
Student
- can measure oscilloscope signal timings, program execution time, and interference.
- can report on the results of the work
Assessment criteria, good (3-4)
Student
- can measure the frequency, bandwidth, power and deviation of the signal with the spectral analyzer and the interference radiation and environmental disturbance caused by the device under investigation
Assessment criteria, excellent (5)
Student
- can measure and analyze the quality of both signal and interference by various devices and methods, and explain their mechanisms of generation,
- Is able to write high quality reports regarding course exercises
Enrolment period
24.11.2024 - 19.01.2025
Timing
01.01.2025 - 04.05.2025
Credits
5 op
Mode of delivery
Contact teaching
Unit
ICT Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in ICT Engineering
Teachers
- Jaana Hännikäinen
Person in charge
Jaana Hännikäinen
Groups
-
23I226
Objectives (course unit)
The student is able to use measuring devices, make connections, evaluate the correctness of the results and report on the working methods, equipment and connections studied and the results obtained.
Content (course unit)
Group work on topics such as digital technology, data transfer, microcontrollers, i / o circuits, sensors, regulators and other electronics, timing of signals, program run times, interference, interference, and signal quality.
Assessment criteria, satisfactory (1-2) (course unit)
Student
- can measure oscilloscope signal timings, program execution time, and interference.
- can report on the results of the work
Assessment criteria, good (3-4) (course unit)
Student
- can measure the frequency, bandwidth, power and deviation of the signal with the spectral analyzer and the interference radiation and environmental disturbance caused by the device under investigation
Assessment criteria, excellent (5) (course unit)
Student
- can measure and analyze the quality of both signal and interference by various devices and methods, and explain their mechanisms of generation,
- Is able to write high quality reports regarding course exercises
Assessment scale
0-5
Enrolment period
22.11.2023 - 14.01.2024
Timing
01.01.2024 - 05.05.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
ICT Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in ICT Engineering
Teachers
- Jaana Hännikäinen
Person in charge
Jaana Hännikäinen
Groups
-
22I226
Objectives (course unit)
The student is able to use measuring devices, make connections, evaluate the correctness of the results and report on the working methods, equipment and connections studied and the results obtained.
Content (course unit)
Group work on topics such as digital technology, data transfer, microcontrollers, i / o circuits, sensors, regulators and other electronics, timing of signals, program run times, interference, interference, and signal quality.
Assessment criteria, satisfactory (1-2) (course unit)
Student
- can measure oscilloscope signal timings, program execution time, and interference.
- can report on the results of the work
Assessment criteria, good (3-4) (course unit)
Student
- can measure the frequency, bandwidth, power and deviation of the signal with the spectral analyzer and the interference radiation and environmental disturbance caused by the device under investigation
Assessment criteria, excellent (5) (course unit)
Student
- can measure and analyze the quality of both signal and interference by various devices and methods, and explain their mechanisms of generation,
- Is able to write high quality reports regarding course exercises
Assessment scale
0-5
Enrolment period
15.12.2022 - 08.01.2023
Timing
01.01.2023 - 07.05.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
ICT Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in ICT Engineering
Teachers
- Tomi Salo
Person in charge
Tomi Salo
Groups
-
21I226
Objectives (course unit)
The student is able to use measuring devices, make connections, evaluate the correctness of the results and report on the working methods, equipment and connections studied and the results obtained.
Content (course unit)
Group work on topics such as digital technology, data transfer, microcontrollers, i / o circuits, sensors, regulators and other electronics, timing of signals, program run times, interference, interference, and signal quality.
Assessment criteria, satisfactory (1-2) (course unit)
Student
- can measure oscilloscope signal timings, program execution time, and interference.
- can report on the results of the work
Assessment criteria, good (3-4) (course unit)
Student
- can measure the frequency, bandwidth, power and deviation of the signal with the spectral analyzer and the interference radiation and environmental disturbance caused by the device under investigation
Assessment criteria, excellent (5) (course unit)
Student
- can measure and analyze the quality of both signal and interference by various devices and methods, and explain their mechanisms of generation,
- Is able to write high quality reports regarding course exercises
Assessment scale
0-5
Enrolment period
15.11.2021 - 09.01.2022
Timing
12.01.2022 - 20.04.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
ICT Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in ICT Engineering
Teachers
- Tomi Salo
Person in charge
Tomi Salo
Groups
-
20I226
Objectives (course unit)
The student is able to use measuring devices, make connections, evaluate the correctness of the results and report on the working methods, equipment and connections studied and the results obtained.
Content (course unit)
Group work on topics such as digital technology, data transfer, microcontrollers, i / o circuits, sensors, regulators and other electronics, timing of signals, program run times, interference, interference, and signal quality.
Assessment criteria, satisfactory (1-2) (course unit)
Student
- can measure oscilloscope signal timings, program execution time, and interference.
- can report on the results of the work
Assessment criteria, good (3-4) (course unit)
Student
- can measure the frequency, bandwidth, power and deviation of the signal with the spectral analyzer and the interference radiation and environmental disturbance caused by the device under investigation
Assessment criteria, excellent (5) (course unit)
Student
- can measure and analyze the quality of both signal and interference by various devices and methods, and explain their mechanisms of generation,
- Is able to write high quality reports regarding course exercises
Assessment scale
0-5