Construction Production TechnologyLaajuus (5 cr)
Code: T300DI06
Credits
5 op
Objectives
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Enrolment period
02.07.2024 - 15.09.2024
Timing
02.09.2024 - 13.12.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Ville-Pekka Lehtonen
Groups
-
23RTA
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
02.07.2024 - 15.09.2024
Timing
02.09.2024 - 13.12.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Hannu Kauranen
Groups
-
23RTB
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
02.07.2024 - 15.09.2024
Timing
02.09.2024 - 13.12.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Hannu Kauranen
Groups
-
23RTD
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
02.07.2024 - 15.09.2024
Timing
02.09.2024 - 13.12.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Hannu Kauranen
Groups
-
23RTC
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.12.2023 - 21.01.2024
Timing
01.01.2024 - 30.07.2024
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Tommi Lehtonen
Person in charge
Katja Finnilä
Groups
-
23AI371
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
04.09.2023 - 11.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Ville-Pekka Lehtonen
Groups
-
22RTA
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
04.09.2023 - 11.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Ville-Pekka Lehtonen
Groups
-
22RTB
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
04.09.2023 - 11.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Ville-Pekka Lehtonen
Groups
-
22RTC
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
04.09.2023 - 11.12.2023
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Ville-Pekka Lehtonen
Groups
-
22RTD
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2022 - 18.09.2022
Timing
29.08.2022 - 16.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Tommi Lehtonen
Groups
-
21RTA
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2022 - 18.09.2022
Timing
29.08.2022 - 16.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Tommi Lehtonen
Groups
-
21RTB
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2022 - 18.09.2022
Timing
29.08.2022 - 13.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Tommi Lehtonen
Groups
-
21RTC
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.07.2022 - 18.09.2022
Timing
29.08.2022 - 13.12.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Katja Finnilä
- Ville-Pekka Lehtonen
Person in charge
Tommi Lehtonen
Groups
-
21RTD
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5
Enrolment period
01.12.2021 - 17.01.2022
Timing
14.01.2022 - 31.07.2022
Credits
5 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Petri Lyly
- Pasi Samppala
- Ville-Pekka Lehtonen
Person in charge
Petri Lyly
Groups
-
21AI351
Objectives (course unit)
The student knows the construction stages of a conventional construction site and the production methods involved. They will be able to use general job planning files in the industry and use them to make site-specific production plans. The student is able to design and select production methods and construction machines suitable for work phases, taking into account productivity and occupational safety aspects.
Content (course unit)
Site construction, construction and foundation phase, frame and supplementary component phase and interior fabrication phase. Design of production methods for the construction stages. Comparison and selection of work methods for work types based on production files. Uses and selection criteria for construction machinery and equipment. Occupational safety management at the construction site.
Assessment criteria, satisfactory (1-2) (course unit)
The student recognizes the stages of construction of a conventional construction site. He recognizes site-specific production plans. The student is able to retrieve information from generalized production files and use them to design individual tasks.
Assessment criteria, good (3-4) (course unit)
In addition to the above, the student is familiar with the production methods of assignments related to construction stages. He / she can use industry information sources and, under his / her guidance, draw up key site-specific production plans (eg area plan, element installation plan)
Assessment criteria, excellent (5) (course unit)
In addition to the above, you will be able to retrieve source information from general sources and make techno-economical calculations based on them, to explore alternative production methods and to choose the right methods, equipment and resources for each task, taking into account productivity, safety and quality.
Assessment scale
0-5