Geospatial SurveyingLaajuus (3 cr)
Code: 5R00GQ74
Credits
3 op
Objectives
The students learn the basics of site and civil engineering surveying techniques and surveying tasks. They learn about maps and coordinate and elevation systems and can manage the simplest geodetic calculation works. During the course the students learn how to handle the normal geodetic surveying instruments and also carry out exercises with them. The main surveying tasks are levelling works and working with total station.
Content
Surveying concepts, angle units, coordinates, maps, coordinate and elevation systems the basics of geodetic calculations, planimeter, level and levelling, total station and working with it.
Assessment criteria, satisfactory (1-2)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Skills shortcomings in the above areas are allowed, but one third of the areas mentioned must be mastered in order to complete the course.
Assessment criteria, good (3-4)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Some shortcomings in the abovementioned areas are allowed.
Assessment criteria, excellent (5)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
He/ she will also be able to apply the above mentioned areas to construction tasks.
Enrolment period
01.12.2024 - 20.01.2025
Timing
03.03.2025 - 30.04.2025
Credits
3 op
Mode of delivery
Contact teaching
Unit
Construction Architect
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Architect
Teachers
- Ilkka Tasanen
- Jouko Liuha
Person in charge
Hannu Kauranen
Groups
-
24I800
Objectives (course unit)
The students learn the basics of site and civil engineering surveying techniques and surveying tasks. They learn about maps and coordinate and elevation systems and can manage the simplest geodetic calculation works. During the course the students learn how to handle the normal geodetic surveying instruments and also carry out exercises with them. The main surveying tasks are levelling works and working with total station.
Content (course unit)
Surveying concepts, angle units, coordinates, maps, coordinate and elevation systems the basics of geodetic calculations, planimeter, level and levelling, total station and working with it.
Assessment criteria, satisfactory (1-2) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Skills shortcomings in the above areas are allowed, but one third of the areas mentioned must be mastered in order to complete the course.
Assessment criteria, good (3-4) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Some shortcomings in the abovementioned areas are allowed.
Assessment criteria, excellent (5) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
He/ she will also be able to apply the above mentioned areas to construction tasks.
Assessment scale
0-5
Enrolment period
01.12.2024 - 19.01.2025
Timing
01.01.2025 - 31.07.2025
Credits
3 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Ilkka Tasanen
- Jouko Liuha
Person in charge
Ilkka Tasanen
Groups
-
24RTA
Objectives (course unit)
The students learn the basics of site and civil engineering surveying techniques and surveying tasks. They learn about maps and coordinate and elevation systems and can manage the simplest geodetic calculation works. During the course the students learn how to handle the normal geodetic surveying instruments and also carry out exercises with them. The main surveying tasks are levelling works and working with total station.
Content (course unit)
Surveying concepts, angle units, coordinates, maps, coordinate and elevation systems the basics of geodetic calculations, planimeter, level and levelling, total station and working with it.
Assessment criteria, satisfactory (1-2) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Skills shortcomings in the above areas are allowed, but one third of the areas mentioned must be mastered in order to complete the course.
Assessment criteria, good (3-4) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Some shortcomings in the abovementioned areas are allowed.
Assessment criteria, excellent (5) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
He/ she will also be able to apply the above mentioned areas to construction tasks.
Assessment scale
0-5
Enrolment period
01.12.2024 - 19.01.2025
Timing
01.01.2025 - 31.07.2025
Credits
3 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Ilkka Tasanen
- Jouko Liuha
Person in charge
Petri Murtomaa
Groups
-
24RTB
Objectives (course unit)
The students learn the basics of site and civil engineering surveying techniques and surveying tasks. They learn about maps and coordinate and elevation systems and can manage the simplest geodetic calculation works. During the course the students learn how to handle the normal geodetic surveying instruments and also carry out exercises with them. The main surveying tasks are levelling works and working with total station.
Content (course unit)
Surveying concepts, angle units, coordinates, maps, coordinate and elevation systems the basics of geodetic calculations, planimeter, level and levelling, total station and working with it.
Assessment criteria, satisfactory (1-2) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Skills shortcomings in the above areas are allowed, but one third of the areas mentioned must be mastered in order to complete the course.
Assessment criteria, good (3-4) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Some shortcomings in the abovementioned areas are allowed.
Assessment criteria, excellent (5) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
He/ she will also be able to apply the above mentioned areas to construction tasks.
Assessment scale
0-5
Enrolment period
01.12.2024 - 19.01.2025
Timing
01.01.2025 - 31.07.2025
Credits
3 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Ilkka Tasanen
- Jouko Liuha
Person in charge
Petri Murtomaa
Groups
-
24RTC
Objectives (course unit)
The students learn the basics of site and civil engineering surveying techniques and surveying tasks. They learn about maps and coordinate and elevation systems and can manage the simplest geodetic calculation works. During the course the students learn how to handle the normal geodetic surveying instruments and also carry out exercises with them. The main surveying tasks are levelling works and working with total station.
Content (course unit)
Surveying concepts, angle units, coordinates, maps, coordinate and elevation systems the basics of geodetic calculations, planimeter, level and levelling, total station and working with it.
Assessment criteria, satisfactory (1-2) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Skills shortcomings in the above areas are allowed, but one third of the areas mentioned must be mastered in order to complete the course.
Assessment criteria, good (3-4) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Some shortcomings in the abovementioned areas are allowed.
Assessment criteria, excellent (5) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
He/ she will also be able to apply the above mentioned areas to construction tasks.
Assessment scale
0-5
Enrolment period
01.12.2024 - 19.01.2025
Timing
01.01.2025 - 31.07.2025
Credits
3 op
Mode of delivery
Contact teaching
Unit
Construction Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Ilkka Tasanen
- Jouko Liuha
Person in charge
Petri Murtomaa
Groups
-
24RTD
Objectives (course unit)
The students learn the basics of site and civil engineering surveying techniques and surveying tasks. They learn about maps and coordinate and elevation systems and can manage the simplest geodetic calculation works. During the course the students learn how to handle the normal geodetic surveying instruments and also carry out exercises with them. The main surveying tasks are levelling works and working with total station.
Content (course unit)
Surveying concepts, angle units, coordinates, maps, coordinate and elevation systems the basics of geodetic calculations, planimeter, level and levelling, total station and working with it.
Assessment criteria, satisfactory (1-2) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Skills shortcomings in the above areas are allowed, but one third of the areas mentioned must be mastered in order to complete the course.
Assessment criteria, good (3-4) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
Some shortcomings in the abovementioned areas are allowed.
Assessment criteria, excellent (5) (course unit)
The student knows well the following areas and is able to demonstrate his / her skills in the test session; national geodetic coordinate and altitude systems (both new and old), angular units used for surveying, and angular and distance measurement methods, as well as common geodetic calculations, leveling tasks and leveling calculations.
He/ she knows how to use a planimeter, a leveling device and a tachymeter.
He/ she will also be able to apply the above mentioned areas to construction tasks.
Assessment scale
0-5