MechanicsLaajuus (3 cr)
Code: 5N00EI67
Credits
3 op
Objectives
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Enrolment period
03.08.2024 - 12.09.2024
Timing
02.09.2024 - 13.12.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
24BIOTA
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.12.2023 - 22.01.2024
Timing
15.01.2024 - 26.05.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Noora Erkkilä
Person in charge
Noora Erkkilä
Groups
-
24AI231
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
22.11.2023 - 14.01.2024
Timing
01.01.2024 - 01.05.2024
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
24AI112
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
22.08.2023 - 22.10.2023
Timing
23.10.2023 - 15.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
23AUTOA
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
22.08.2023 - 22.10.2023
Timing
23.10.2023 - 15.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
23AUTOB
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
07.06.2023 - 08.09.2023
Timing
28.08.2023 - 20.10.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Reijo Manninen
Person in charge
Reijo Manninen
Groups
-
23BIOTA
-
23BIOTB
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2023 - 10.09.2023
Timing
28.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
23I231B
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
01.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
23RTB
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Noora Erkkilä
Person in charge
Noora Erkkilä
Groups
-
23RTA
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2023 - 11.08.2023
Timing
01.08.2023 - 31.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Person in charge
Markus Aho
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
01.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
23RTC
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
01.07.2023 - 17.09.2023
Timing
01.08.2023 - 31.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Noora Erkkilä
Person in charge
Noora Erkkilä
Groups
-
23RTD
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2023 - 03.09.2023
Timing
01.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
23I112C
-
23I112B
-
23I112A
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2023 - 10.09.2023
Timing
01.08.2023 - 17.12.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
23I112C
-
23I112B
-
23I112A
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
21.11.2022 - 05.03.2023
Timing
03.03.2023 - 19.05.2023
Credits
3 op
Virtual portion
3 op
Mode of delivery
Online learning
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 120
Teachers
- Sami Suhonen
Person in charge
Sami Suhonen
Groups
-
23CAMPUSONLINECAMPUSONLINE
-
VAPAA
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.12.2022 - 21.01.2023
Timing
16.01.2023 - 28.05.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sami Suhonen
Person in charge
Sami Suhonen
Groups
-
23AI112
-
23AI371
-
23AI253
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.12.2022 - 15.01.2023
Timing
01.01.2023 - 01.05.2023
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
23I231A
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
22.08.2022 - 23.10.2022
Timing
24.10.2022 - 10.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
22AUTOA
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
22.08.2022 - 23.10.2022
Timing
24.10.2022 - 10.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Vehicle Engineering
Teachers
- Jari Puranen
Person in charge
Jari Puranen
Groups
-
22AUTOB
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 15.09.2022
Timing
12.09.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Fysiikka Virtuaalihenkilö
Person in charge
Sampo Saari
Groups
-
22RTC
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 15.09.2022
Timing
01.09.2022 - 19.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
22RTA
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 31.08.2022
Timing
29.08.2022 - 19.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
22I231B
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
01.08.2022 - 19.09.2022
Timing
29.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Roope Siikanen
Person in charge
Roope Siikanen
Groups
-
22RTD
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 09.09.2022
Timing
29.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Roope Siikanen
Person in charge
Markus Aho
Groups
-
22I112B
-
22I112C
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
23.07.2022 - 11.09.2022
Timing
22.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Bioproduct Engineering
Teachers
- Lauri Judin
Person in charge
Lauri Judin
Groups
-
22BIOTA
-
22BIOTB
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Assessment criteria - fail (0) (Not in use, Look at the Assessment criteria above)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment criteria - satisfactory (1-2) (Not in use, Look at the Assessment criteria above)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria - good (3-4) (Not in use, Look at the Assessment criteria above)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria - excellent (5) (Not in use, Look at the Assessment criteria above)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Enrolment period
02.07.2022 - 15.09.2022
Timing
01.08.2022 - 19.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Sampo Saari
Person in charge
Sampo Saari
Groups
-
22RTB
-
22RTC
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 21.08.2022
Timing
01.08.2022 - 23.10.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Open University of Applied Sciences
Teachers
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
22AVOTTTeollisuusteknologiayksikön polkuopiskelijaryhmä
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 01.09.2022
Timing
01.08.2022 - 19.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Anne Leppänen
Person in charge
Anne Leppänen
Groups
-
22I112A
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 31.08.2022
Timing
01.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Fysiikka Virtuaalihenkilö
Person in charge
Lauri Judin
Groups
-
22I112C
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.07.2022 - 04.09.2022
Timing
01.08.2022 - 31.12.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Electrical and Automation Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
22AI231
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
01.08.2022 - 05.09.2022
Timing
01.08.2022 - 23.10.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
Building Services Engineering
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Building Services Engineering, HVAC Systems
Teachers
- Lauri Judin
Person in charge
Lauri Judin
Groups
-
22I254
-
22I253
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.12.2021 - 16.01.2022
Timing
01.01.2022 - 15.05.2022
Credits
3 op
Mode of delivery
Contact teaching
Campus
TAMK Main Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical Engineering
Teachers
- Tuomo Nieminen
Person in charge
Tuomo Nieminen
Groups
-
22I231A
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5
Enrolment period
02.12.2021 - 21.01.2022
Timing
01.01.2022 - 11.03.2022
Credits
3 op
Mode of delivery
Contact teaching
Unit
TAMK Mathematics and Physics
Campus
TAMK Main Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Mechanical Engineering
Teachers
- Sampo Saari
Person in charge
Sampo Saari
Groups
-
22AI112P
Objectives (course unit)
The student is able to
-use physical quantities and units
-apply the basic laws of mechanics to the related problems
-interpret a problem to physical quantities and relations between them and solve different quantities from equations
-justify the chosen solution and method from technical and physical point of view
-produce and understand graphical presentations
Content (course unit)
SI-system, unit calculation, motion with constant and changing velocity, force and Newton's laws, work, energy and power, energy principles in mechanics.
Assessment criteria, satisfactory (1-2) (course unit)
Student is able to use quantities and units and solve simple problems in mechanics.
Assessment criteria, good (3-4) (course unit)
Student is able to use quantities and units and solve such problems in mechanics, which resemble problems given as examples during the course. Student is able to use the basic laws in mechanics to new problems and explain the reasoning.
Assessment criteria, excellent (5) (course unit)
Student is able to use quantities and units. Student has a comprehensive understanding of the basic laws in mechanics and fluent skill to analyze and solve even complicated problems and justify the solution.
Assessment criteria, pass/fail (course unit)
Fail:
Student doesn't demonstrate the skills and knowledge to use quantities and units.Student is incapable to analyze mechanical phenomena and can't solve simple problems which resemble problems given as examples during the course.
Assessment scale
0-5